How much is Zhangzhou silicon release agent fluorocarbon release agent per ton Huaihua

News: How much is Zhangzhou silicon release agent fluorocarbon release agent per ton Huaihua News








Treatment of abrasion: The stone care agent is used for surface treatment, and the surface protection treatment is performed regularly. Introduction to stone types Marble is soft, has poor resistance to acid and alkali, and is less resistant to weathering. It is easy to absorb oil, water and other liquids, and it is easy to be scratched. The protection of polished surface marble is pre-protection with permeable waterproof and oil-proof protective agent before the marble is put into use. Use neutral cleaning agent for regular cleaning, and acid cleaning agent is not allowed. Limestone easily absorbs oils and other aqueous liquids, is easily scratched and corroded by acidic substances, and is more susceptible to contamination than marble. Most limestones are porous and water-absorbent. It can be cleaned regularly with a neutral detergent for daily use. There are basic definitions of general terminology, professional terminology and product terminology in the explanation of commonly used terms in surrounding stone care. For reference by the industry, this common term explanation will declare the standard. General terms 2.1 Stone care Stone protection and daily stone maintenance, stone cleaning disease treatment and stone surface treatment, collectively referred to as the two protections and two treatments. 2 Stone care workers Workers engaged in stone care work. (Technical types of work) 2.3 The professional qualifications of stone care workers are the qualifications obtained through assessment in accordance with the national professional standards for stone care workers. Material surface treatment improves the surface performance and decorative effect of decorative stone, and is a collective term for the physical and chemical treatment processes performed on the surface of the stone.


After the silicone molding process, paint can be applied. This is the name of the layman. In fact, the name of the insider refers to the silicone screen printing ink, the silicone spray ink, the hand-feeling oil, etc. Among them, the inks are white, black, color, etc., if the hand feels oily, there are glossy and matte points. Other processing techniques after the silica gel is dried include: bonding, cutting, cleaning and so on.


Silicone release agent
Product description:
The release force is strong, the mold does not accumulate, and the surface of the product is smooth. Compared with other water-based release agents, silicone release agents have better safety and product appearance.


Appearance
Milky white milky liquid

Ingredients
Water-soluble silicone emulsion

Solid content
30%

Specific gravity
1.0



News: How much is Zhangzhou silicon release agent fluorocarbon release agent per ton Huaihua News








Granite, Dali and limestone are usually polished and require different maintenance to maintain their luster. Matte (Honed): The surface is smooth, but low-polished, diffuse reflection, matt, no mirror effect, no light pollution. Rough-Rubbing: The surface is simply polished, and the machine-cut grains formed during the cutting of the rough board can be polished. It feels like a rough matte finish. Machine-Cut: It is directly cut and formed by equipment such as a circular sawing sand saw or a bridge cutting machine. The surface is rough and has obvious machine-cut lines. Pickling: Use strong acid to corrode the surface of the stone, so that it has small corrosion marks, and the appearance is more pristine than the polished surface.


Looking at the compatibility of various products, the argument upstairs is also reasonable! There are many waterproofing agents themselves are expansion agents. More information, better suggestions, free professional technical consultation for concrete waterproofing and leakage repair, avoiding the trouble of repairing today and leaking tomorrow; repairing every year and leaking every year


How to use:


1. 1. Before use, it is generally diluted with 3-10 times tap water, and the specific dilution ratio needs to be determined according to the complexity of the product and the actual situation.


2. Except for water, please do not add any other additives to the concentrate.


3. On the pre-treated or cleaned mold, spray the release agent 3-5 times under normal processing temperature to ensure that the mold has a uniform release mold formation.


4. 4. Each spray can be demoulded 5-10 times.


Store:
After use, please cover the barrel tightly and keep the barrel in a cool place.





News: How much is Zhangzhou silicon release agent fluorocarbon release agent per ton Huaihua News








Penetration and reinforcement of the surface of large stone slabs. Some stone surfaces have many micro-cracks, and some micro-cracks even penetrate deep into the slab. Although they have been reinforced, their strength still cannot meet the requirements of grinding and polishing or the requirements of finished stone slabs. At this time, it is necessary to choose to infiltrate and strengthen the stone surface. The front penetration reinforcement process includes the penetration of the highly penetrating epoxy resin glue into the gaps on the surface of the board, after drying, and then grinding and polishing. The low-viscosity epoxy resin with good permeability should be used for the surface penetration and strengthening treatment of the board. If the solidification time is too short, the penetration depth of the epoxy resin into the stone board will be reduced, and the reinforcement effect will be affected.


Soda powder? Yes, it’s fine.