Anhui Ma'anshan Floor Grinding Machine Manufacturer 12 Curing Agent Grinding Machine

product description:

* Adopting aluminum alloy/cast iron gear box body, long life, high precision, good heat dissipation performance, gears are processed by grinding teeth to ensure smooth operation and noise-free operation of the machine. ``

* The appearance design is novel, the use of enlarged steel is sturdy and durable, the handle can be intelligently adjusted, and the design is designed according to the height of the human body, and the operation is labor-saving and comfortable.

* Equipped with 15/20HP high-power Siemens motors, the electrical control components adopt imported Schneider Electric to ensure strong power and suitable for large-area construction. At the same time, it is equipped with LED headlights, which can be operated at night.

* One machine is multi-purpose, the machine is equipped with two external suction ports, which can be used for both dry and wet, suitable for various construction environments.

* Rotation and revolution gearbox design, no leakage on the ground, to ensure the flatness of the ground. Compared with other companies' 700 grinders, the workmanship is fine, the processing precision is high, the quality is good, the service is excellent, and the after-sales service is more guaranteed!







Applicable range:

Stone renovation, concrete hardener grinding and polishing are integrated, and alloy cutters can be installed to remove and polish large areas of old epoxy and old paint floors.

Technical parameters: (QB-700 grinding machine)







Working width

700mm

Horse power

15.0/20.0HP

Voltage

380V

Rotating speed

0-1500pm/min

Water tank

40.0L

weight

380.0kg

Number of Discs

4 discs and 12 grinding discs







Operating instructions of 700 floor grinder:

1. Take the machine out of the packing box and lay it flat on the ground.

2. After the chassis is tilted, the chassis is exposed. Use diamond or resin grinding discs according to the ground conditions. Install the grinding head on the plum blossom plate and fix it, and then adjust the outer skirt to a suitable position. 4. Lay the machine flat, the four discs can automatically adjust the flatness, and the twelve grinding heads on the chassis ensure that they are on the flat surface. 5. Plug in the power, turn the switch to start the machine, and then adjust to the required speed, then it can run normally. 6. After the machine is started, the proper speed can be selected according to the strength of the ground and the treatment effect.

7. According to site requirements, choose dry milling or water milling. Dry milling needs to be equipped with industrial vacuum cleaners. 8. In operation, if there is any abnormal phenomenon, please stop the machine immediately and re-use it after inspection.

Anhui Maanshan Floor Grinding Machine Manufacturer 12 Curing Agent Grinding Machine
Anhui Ma'anshan Floor Grinding Machine Manufacturer 12 Curing Agent Grinding Machine