Scope of application:
Stone renovation, floor cutting and leveling, concrete penetrant, hardener grinding treatment, polishing, integrated, can be equipped with alloy tools for the removal and polishing of large areas of old epoxy and old paint floors.
Product introduction: A variety of supporting chassis, separation type, and cross type are available for customer construction selection; intelligent speed adjustment and troubleshooting can increase the use effect and convenience; stepless wheel axle adjustment and positioning can be used for different stones. Floor grinding force effect; the machine body adopts an integrated design of aluminum alloy castings, high precision, high strength, long life, one machine with multiple functions, convenient handling, easy operation, beautiful appearance, large water tank capacity; multi-purpose design, adjustable weight, grinding disc Adjustable number, adjustable speed, can achieve the best construction effect; control panel operation is more convenient and flexible, beautiful and generous
Technical parameters (LC-630 four-disc grinder):
Working width: 630mm
Horsepower: 11HP (Siemens motor)
Voltage: 380V
Speed: 0-1800pm/min
Water tank: 20L
Weight: 280kg
Number of discs: 4 discs and 12 grinding discs
Optional weighting: 30kg/block
1. Four discs and 12 grinding heads run crosswise, leaving no gaps during grinding, and can be installed with various consumables to reduce construction costs.
2. Female workers can operate, reducing labor costs. The extended operating rod allows one person to complete the replacement of grinding discs and grinding heads.
3. The body is detachable, easy to carry, stable operation and high efficiency.
4. The gearbox is made of aluminum alloy integral mold casting, with good sealing, high precision, good heat dissipation and not easy to deform.
5. Double seal design, effectively reducing oil leakage.
6. The body is equipped with a vacuum cleaner external interface, which can be used for both dry and wet purposes.
7. Gear machining accuracy is high (level 4), more heat treatment than general gears to increase grinding tooth hardness (tempering, carburizing, high frequency induction); finishing increases grinding tooth bite and reduces the damage to grinding teeth caused by high-speed operation And noise (refined benchmarks,
Finished tooth profile). I
8. There are shock-absorbing pads and shock-absorbing springs between each component to reduce vibration, increase operating comfort and smoothness of grinding. Strong magnetic sticker head, easy to replace. The water tank and gear box shell are made of glass fiber reinforced plastic, which is high in hardness, easy to clean, and does not age; the factory-distributed conversion head is optional (metal or plastic).
Operating Instructions of LC630 Floor Grinding Machine
1. Take the machine out of the box and place it on the ground
2. After the chassis is tilted, the chassis is exposed. Use diamond or resin grinding discs according to the ground conditions. Install the grinding head on the plum blossom plate and fix it, and then adjust the outer skirt to a suitable position.
4. Lay the machine flat, the four discs can automatically adjust the flatness, and the twelve grinding heads on the chassis ensure that they are on the flat surface.
5. Plug in the power, turn the switch to start the machine, and then adjust to the required speed, then it can run normally.
6. After the machine is started, the proper speed can be selected according to the strength of the ground and the treatment effect.
7. According to site requirements, choose dry mill or water mill. Dry mill needs to be equipped with industrial vacuum cleaner
8. In operation, if there is any abnormal phenomenon, please stop the machine immediately and re-use it after inspection.
Lhasa 630 Frequency Conversion Multifunctional Floor Grinding Machine Model 700 Hardening Agent Wear-resistant Floor Grinding Machine
Lhasa 630 frequency conversion multifunctional floor grinder 700 type hardener wear-resistant floor grinder
Click image to view original image
