News: Where to buy Jiaxing release agent msds Jinchang Information
Class C decoration materials can only be used for the exterior of buildings and other outdoor uses, and their sales must be restricted. That is to say, Class C stones can only be used outdoors. As for Ir2.8 stones, they can only be used for roadbeds, culverts, and dams. , Seawalls and buried pipeline projects far away from people’s lives. Adhere to the scientific nature of the testing methods and the accuracy of the testing results. The issue of stone radioactivity is very professional, and it is difficult for people without professional knowledge to figure it out. In recent years, some unclear expressions have caused people to panic about the consumption of stone materials. Of course, it is not that: Since radioactivity is widespread, there is no exact quantitative conclusion on the degree of damage, why do you still talk about the radioactivity of stone materials? This idea is also incorrect.
Silane impregnation is simply silane spraying on the surface of the concrete. First, explain what silane is. In general seaport projects, inland saline-alkali land, projects with severe freeze-thaw damage and harsh environment, silane impregnation anticorrosion construction of concrete structures is required. The silane referred to here generally refers to isobutyl(ene)triethoxysilane. DB-H538 (liquid) and isooctyltriethoxysilane DB-H580 (paste), and the content requirements are relatively high, respectively requiring more than 98.9% and 80%. Next, explain what impregnation is. Dipping is the process of spraying the surface of the concrete structure. Depending on the requirements of the engineering design documents, the different silane products used, and the different construction parts, different spraying methods or tools, such as roller coating, high-pressure spraying, airless spraying, etc., will be determined. Regardless of the index requirements of silane products or the application testing requirements after spraying, they are generally implemented in accordance with the standards of the Ministry of Communications's Seaport Engineering Concrete Structure Anti-corrosion Technical Code (JTJ275-2000).
Silicone release agent
Product description:
The release force is strong, the mold does not accumulate, and the surface of the product is smooth. Compared with other water-based release agents, silicone release agents have better safety and product appearance.
Appearance
Milky white milky liquid
Ingredients
Water-soluble silicone emulsion
Solid content
30%
Specific gravity
1.0
News: Where to buy Jiaxing release agent msds Jinchang Information
HFB foamed sulfoaluminate board is a molded thermal insulation material, its thermal conductivity is .69W/(mk), which is higher than that of polystyrene board, and its thermal insulation effect is slightly inferior to that of polystyrene board system; but its thermal inertia index is higher than that of polystyrene board. The board system is much better, which can well meet the requirements of K and D values in the "Code". This means that the thermal insulation effect of this system is better than other systems. The index of the polystyrene particle insulation system stipulates the thermal conductivity of .6W/. However, it has passed the inspections of many engineering examples in the southwest region, and most of them are around .14. The reason is that the mix ratio of the materials submitted for inspection and the materials actually used in the project are different. Coupled with cutting corners and materials during construction, and the thickness is not up to standard, basically none of the energy-saving projects in Chengdu that adopt this system are qualified.
The difference is that the waterproof coating turns the concrete into a waterproof barrier. The JS waterproof coating is made into a film by itself for waterproofing. The polymer cement-based waterproof coating is a waterproof layer made on the surface of the cement, which can be seen from the surface. The cement-based permeable crystalline waterproof coating is basically invisible when it penetrates into the concrete surface.
How to use:
1. 1. Before use, it is generally diluted with 3-10 times tap water, and the specific dilution ratio needs to be determined according to the complexity of the product and the actual situation.
2. Except for water, please do not add any other additives to the concentrate.
3. On the pre-treated or cleaned mold, spray the release agent 3-5 times under normal processing temperature to ensure that the mold has a uniform release mold formation.
4. 4. Each spray can be demoulded 5-10 times.
Store:
After use, please cover the barrel tightly and keep the barrel in a cool place.
News: Where to buy Jiaxing release agent msds Jinchang Information
Among them, copper, iron, arsenic, rock salt, glauber's salt, gypsum, etc. can be called dominant minerals. Coal, iron, oil, natural gas and other reserves are abundant. Others are also distributed in gold, silver, lead, marble, asbestos, phosphorus, platinum, Mineral deposits such as sandstone. As of 213, there are 270 million tons of iron ore, 100 million tons of coal, and 1.1 billion tons of salt. Yunnan sandstone Yunnan's sandstone industry started early, with relatively high mining and processing technology, more beautiful textures, and its own style characteristics. Yunnan sandstone is also rich in color. Can be processed into product embossed flower panels, sculpture fountains, Roman columns, door and window covers, lines, jigsaw panels, corbels, home accessories, environmental sculptures; garden sculptures, campus sculptures, celebrity sculptures, European components, hollow columns, hollow flower panels , Plastic model rockery, landscape sculpture, etc.
It should be a substandard product, ask for an inspection report, manufacturer's certificate of conformity, or return the product.
Click image to view original image
