Bengbu silicone release agent formula Hunan

News: Bengbu Silicone Release Agent Formula Hunan News








A "crater" is a depression on the top of the volcanic cone, with an opening that leads to the surface. It is a product of volcano formation. The volcano ejected mainly gas, but large amounts of volcanic rock and solid matter like slag and ash were also ejected. In fact, volcanic rock is erupted magma. When the magma rises to a height close to the surface, its temperature and pressure begin to drop, and physical and chemical changes occur, and the magma becomes volcanic rock. The magma in the fracture zone formed when the magma changes in the earth's crust slowly intrudes into the earth's crust and slowly cools to form rocks. Geologists estimate that it will take about 64 years for 2 kilometers of magma to fully crystallize, and the rock is basically flower rock. The earth's crust quickly blasted out of the ground high above the ground, and then fell back and the ground temperature dropped rapidly.


For the unit area consumption of waterproof coatings, manufacturers generally have direct reference data, but the actual construction often varies due to the condition of the base surface and the painting process.


Silicone release agent
Product description:
The release force is strong, the mold does not accumulate, and the surface of the product is smooth. Compared with other water-based release agents, silicone release agents have better safety and product appearance.


Appearance
Milky white milky liquid

Ingredients
Water-soluble silicone emulsion

Solid content
30%

Specific gravity
1.0



News: Bengbu Silicone Release Agent Formula Hunan News








The role of stone glue repair Stone glue repair can make up and repair the natural defects of natural stone. Like chicken feet, cracks, sand holes, stone pits, loose textures and breakages that are common in granite and marble. After repairing the glue, the defective stone can become more perfect, gorgeous, crystal clear and clean, thereby significantly improving the grade of the stone and increasing its value. Enhance the strength and luminosity of the stone, and prevent the stone from being damaged and broken. After repairing the stone, because the glue penetrates into the stone, the physical properties of the stone are changed, the gaps between the crystal particles in the stone are healed, the cracks are bonded, and the strength of the stone is obviously improved. At the same time, the repairing treatment is carried out. The surface of the stone after polishing will be more smooth and dazzling; prevent some loose stone from chipping during the cutting process.


Hello, today Carben Technology will answer your question. To conclude directly, compared with traditional anti-corrosion materials, silane dipping coating has better anti-corrosion effect and more convenient construction process, which can save a lot of manpower, financial resources and time, and greatly improve construction efficiency. It has been widely used in foreign countries, and the use of silane impregnant is still in the development stage in China. The quality and production process requirements of silane are very strict, which makes silane suppliers must have their own R&D team and patented technology. Carbon has reached the domestic level in this respect. After continuous research and development by its professional team, Carbon has its own unique silane impregnant (paste and liquid) formula and production technology, and has successfully applied for a patent. Kaben Technology wishes you safety and safety, and hope to solve your questions~


How to use:


1. 1. Before use, it is generally diluted with 3-10 times tap water, and the specific dilution ratio needs to be determined according to the complexity of the product and the actual situation.


2. Except for water, please do not add any other additives to the concentrate.


3. On the pre-treated or cleaned mold, spray the release agent 3-5 times under normal processing temperature to ensure that the mold has a uniform release mold formation.


4. 4. Each spray can be demoulded 5-10 times.


Store:
After use, please cover the barrel tightly and keep the barrel in a cool place.





News: Bengbu Silicone Release Agent Formula Hunan News








Although the internal wall thermal insulation mortar is used, although the integrity of the thermal insulation layer is good, there is still the possibility of surface layer cracking. The main reasons are as follows: Insulation materials become soft due to dampness. Air penetration is an important factor affecting energy saving. The water vapor generated in buildings can cause the penetration of building structures, walls and roofs. In addition to condensed condensation, wall condensation caused by the temperature difference between indoor and outdoor often occurs. If the room temperature is 2°C and the relative humidity is 7%, the dew point is 14°C, that is, condensation will appear on the wall when the wall temperature is 14°C. In the internal thermal insulation structure system, the thermal insulation layer is placed on the inner side, and the wall temperature is often 14 ℃, that is, condensation occurs at the interface between the thermal insulation layer and the wall structure layer.


Waterproofing needs to be done on the water facing surface. If you can dig out the excellent permeable crystalline waterproofing, use a permeable waterproof guard to do the waterproofing on the cement surface that can be done by yourself. water proof). For the tile surface, first check whether the filling material of the tile gap is complete (if the filling material of the tile gap is not complete, fill it in with Metene glue and then use the stone tile type waterproof guard for waterproofing). Transparent waterproof repair glue can be used for waterproofing on exterior wall paint. The product will penetrate into the base layer, making the base layer waterproof. The product is recommended to be constructed in a dry place. The drier the base surface, the deeper the product can penetrate. If the base surface is full of moisture and the density is high, the material cannot penetrate well. Regarding the principle of waterproof plugging, the source of the water leakage is not blocked, and the water will only permeate into the wall for a long time. When the water reaches a certain level, it will leak out from other parts of the wall. It can't solve the fundamental problem. only spray waterproofing agent outside the roof or exterior wall so that the water can't penetrate into the wall and run away directly can solve the problem.