China Polyurethane Foam Blend Polyol Sda33G Building Roof Spray Rigid PU Foam - China Polyether Poly

Blend Polyol SDA33G
Building Roof Spray Rigid PU Foam
DEscriptION
SDA33G building wall insulation system blend polyol is a kind of spray rigid PU foam blend
polyol, specially used for the insulation of building roof. It used together with isocyanate(PM-200)
to make rigid PU foam through PU spray machine. The foam produced has the characteristics as
following:
n Zero ozone depleting blowing agent
n The strong adhesive force, convenient construction and no seams.
n The low thermal conductivity, low water absorption and good dimensional stability.
n The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 45.5
Compressive Strength GB/T 8813-2008 kPa 268
Tensile Strenght GB/T 9641-88 kPa 265
Oxygen index GB/T 2406.2-2009 % 23.2
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.023
Close Cell Content GB/T 10799-2008 % 90
Water Absorption GB/T 8810-2005 % ≤3

importance: The above mentioned are typical test values, and the specific data may vary slightly
due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 
1 / 1

Basic Info.

Model NO. SDA33G Trademark Shunda Specification Two components Origin China HS Code 39072090

Product Description

Customer Question & Answer Ask something for more details (0)

Blend Polyol SDA33G
Building Roof Spray Rigid PU Foam
DEscriptION
SDA33G building wall insulation system blend polyol is a kind of spray rigid PU foam blend
polyol, specially used for the insulation of building roof. It used together with isocyanate(PM-200)
to make rigid PU foam through PU spray machine. The foam produced has the characteristics as
following:
n Zero ozone depleting blowing agent
n The strong adhesive force, convenient construction and no seams.
n The low thermal conductivity, low water absorption and good dimensional stability.
n The long service life.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m³ 45.5
Compressive Strength GB/T 8813-2008 kPa 268
Tensile Strenght GB/T 9641-88 kPa 265
Oxygen index GB/T 2406.2-2009 % 23.2
Initial Thermal Conductivity GB/T 10294-2008 W/(m·K) 0.023
Close Cell Content GB/T 10799-2008 % 90
Water Absorption GB/T 8810-2005 % ≤3
 

Dimensional Stability (Foam made After 6 days)

-25ºC 70ºC

GB/T 8811-2008 %

≤±1 ≤±1

importance: The above mentioned are typical test values, and the specific data may vary slightly
due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
  
   
1 / 1