Suihua multifunctional high-efficiency and environmentally friendly release agent-large quantity fav

News: Suihua multifunctional environmentally friendly release agent-large quantity favorably





Guangxi Hengyong Building Materials Plugging King is a new technology product developed under the guidance of relevant experts from the Institute of Building Materials Science. Its setting time interval is very short, it will quickly heat up after the end, and produce strength, 15min strength is not less than 12MPa, 1h strength is not less than 24MPa, can be operated with water, and quickly stop water and leak, and the construction is simple, and the adhesion to the base layer It is strong, does not shrink, does not fall off, and can be widely used in building, underground, underwater, tunnels and other projects for leak stoppage, emergency repair, filling, etc.
The product is nitrogen-free, non-toxic, non-flammable and non-explosive.


Technical performance
Setting time (min)
Compressive strength (MPa)
Flexural strength 3d
Bond strength 7d
Impermeability pressure
Initial Condensation
Final Set
15min
1h
1d
3d
7d
(MPa)
(MPa)
(MPa)
1-1.5
2-4
≥12.0
≥24.0
≥40.0
≥45.0
≥55.0
≥5.5
＞1.4
＞1.5
News: Suihua multifunctional environmentally friendly release agent-large quantity favorably

Usage and precautions
First, chisel the leaking point or leaking seam into a vertical bell mouth, clean up the debris or loose powder, and moisten it with water.
Put 1kg of plugging agent into a pot or other mixer, add 0.3-0.35kg of water, and mix quickly into a slurry. When it is lower than 5°C, use water above 20°C to stir.
Put the mixed plugging cement on your hand, and when you feel that the cement is hot and hard, quickly face the leaking water down, and let it go for 3-5 minutes.
For the seepage pit, you can directly put the dry powder of the plugging agent into the pit, and then step on it with your foot, and then let it go after it has hardened.
For serious leaking seams, the drainage method is adopted, the upper seam is blocked first, the lower seam is blocked, and the drainage hole is finally blocked.
For large-area leakage, to find out the leaking point, first plug it with a quick plugging agent, and then wipe the surface with waterproof mortar.
Packaging and storage




The inner plastic packaging bag, the net weight is 25kg, is sealed and stored in a dry environment, the shelf life is 6 months, and it is used up once after opening the bag.