How to use organosilicon defoamer Jilin Jilin

Application method of organosilicon defoamer Jilin Jilin [Application field] It can be widely used in railways, highways, sports halls, dams, hydraulic constructions, tunnels, beaches, reclamation, environmental protection and other projects. Jiang Zhaoli, the domestic division of the Department of Development and Response to Climate Change, also stated at the meeting that my country is currently promoting the development of low-carbon undertakings mainly through the adjustment of energy structure. In fact, the CO2 emitted by residents’ lives is also one of the main sources of greenhouse gases.



Polyacrylamide dephosphorization agent is a multi-complex cationic inorganic polymer flocculant centered on iron ions. It strongly complexes negatively charged roots. At the same time, its hydrolyzed product can adsorb a considerable amount of phosphorus. Compound. Polyacrylamide phosphorus removal agent is the product performance under normal conditions, the total phosphorus removal rate can reach 99%. Polyacrylamide dephosphorization agent is used to dilute this product with clean water to a 5-10% solution according to the amount of sewage influent, mix it evenly, and add it. It can be added in front of the secondary sedimentation tank, and try to add it to the touch oxidation tank. The dosage of this product depends on the status of the total phosphorus in the sewage, and the consumption is also different. The detailed usage shall be determined through small glass test and production experiment. The diluted one should be used up within eight hours. When using, the product can be directly added or added to the dissolution tank first, with a concentration of 10-20%, mixed, and added to the reaction tank with a pump. This product is suitable for a wide range of pH values, especially when used under acidic conditions.



The two ionic types of anion and cation cannot be mixed. The mixed addition will have a reaction effect. Because of the positive and negative charges, a cotton-like substance will be formed, and the liquid will become turbid and unclear. Therefore, this method can also be used for judgment. If you want to be sure, you can let the manufacturer make a clear test result. Through the adaptability of different polyacrylamide in sewage, the classification of the polyacrylamide can be clearly judged. Generally, anionic polyacrylamide is suitable for high-concentration, positively charged suspended matter, and the pH value is neutral or alkaline. The personnel of our polyacrylamide manufacturer have developed a scientific and reasonable oily wastewater treatment process based on years of practical experience. The process is first to separate the oily wastewater from oil and water. In the flocculation and sedimentation stage, we should quantify Adding polyacrylamide and polyaluminum chloride flocculant, the main purpose of our secondary oil-water separation is to emulsify the oily sewage, if it is oily with high freezing point and large particle size.
How to use Jilin Jilin organosilicon defoamer