Click image to view original image
Can a chemical raw material recycling factory accept a small amount? We recycle a wide variety of resins, no matter how large or small we recycle resins, we recycle resin products, we come to our door, and we collect high-priced cash from all over the place.
Bokai Chemical Trade Recycling Company specializes in the recycling of chemical products that are fully recycled, such as chemical raw materials, dyes, pigments, paints, rubber, waxes, chemical additives, chemical metals, etc.
Our company serves every customer attentively and guarantees the quality of every acquisition process. Caring for the environment is the responsibility of each of us. The waste of resources is a shameful behavior. Promoting the recycling of chemical raw materials and dyes is an important mission of our company.
We will continue to uphold the tenet of "one cooperation and mutual trust, multiple cooperation and mutual benefit", and look forward to cooperating with you! High-priced door-to-door recycling, unlimited quantity, you are welcome to visit at any time, call for consultation, and create and develop together. We seek common development with customers.
Recycling dyes manufacturer Bokai Chemical Trade Recycling Company said that acid dyes are widely used in fabric dyeing and people often use them, but the color fastness of these dyes is usually very poor. Recycled dye manufacturers say that some users repair dyes that meet the standards. However, we need to pay attention to certain things that need to be paid attention to when fixing dyes. Let us take a look!
Ningbo stabilizer call for consultation
Organic pigments have bright colors, strong tinting power; low density and sex. Organic pigments look looser, while inorganic pigments are heavier. .articleContenta{color:#;font-size:14px;line-height:25px;};Painting problems and solutions The reason is that the product is smooth or the product is not soaked in place, or the quality of the paint is not good, which will also cause the paint to fall off after being sprayed on. 2. The paint blisters. First, the bubble punctures. If there is water coming out, it means that moisture has penetrated under or behind the paint layer. When exposed to the sun, the water evaporates into steam, which will top the paint leather into bubbles. At this time, First use hot air spray to remove the bubbling paint, let the product dry naturally, then apply the primer, and then repaint the entire repaired surface.
Applicable technical guide: It is applied to dye nylon fiber with acid dye, and then process the dyed product. After dyeing nylon fibers with acid dyes, the dyed product can be treated with NBS to improve its wet fastness, especially to water, sea water, washing, and sweat. The fastness can be significantly improved. Similar to all such additives, The degree of improvement in fastness varies depending on the dyeing method and fiber.
To
Concentration of acid dye: 1.0-2.0% (owf) NBS (calculated by weight of cloth) After dyeing nylon fiber with TELONL, SUPRANOL or other selected acid dyes, rinse it with soft water, and then dye the dyed product with NBS at PH4.5, 70-80°C, 20-30 minutes, post-treatment.
To
Note: If you increase the amount of NBS by one third, you can also use hot air to complete the fixation operation. The wet fastness has been improved to a considerable extent, but the temperature should not exceed 180-185℃. If the temperature exceeds, or the saturated steam is treated, it will affect the NBS. When dissolving or diluting NBS, it is necessary to prevent direct contact with concentrated acetic acid. The contact of NBS with concentrated acetic acid will cause precipitation to occur. Any precipitation that has occurred can be easily dissolved by adding a small amount of ammonia.
To
If there are non-ionic additives in the post-processing, it will cause precipitation and impair the NBS effect (before fixing, it can be washed with soaping agent to prevent abnormal occurrence). If the dyed product is coated with PU or film in the later process, do not fix it with NBS, otherwise it will affect its adhesion effect. The nylon batting that uses NBS as a post-treatment has a rough feel, which will affect its subsequent weaving operations. Therefore, for this kind of dyeing, only dyes with higher wet fastness should be selected for dyeing, and no fixation treatment is required.
Ningbo stabilizer call for consultation
The advantage of chemical raw material dye recovery is that it can promote the reuse of resources. You can only choose a suitable recycling chemical raw material manufacturer according to the actual situation. When looking for a manufacturer, you still need to carefully consider it, so that you can clearly know which manufacturer's recycling price is In any case, whether the recycling process meets the standards is extremely important. It is easy to understand the composition of manufacturers of recycled chemical raw materials, mainly recycling some chemical raw materials for secondary sales. The raw materials purchased by some companies may not be used up, so they can be recycled through these recycling companies to realize resource reuse in this way. This is a new method that is worth choosing. It is not only conducive to capital recovery, but also conducive to resource recycling. use.
To sum up, the content mentioned above is the related matters shared by the recycled fuel manufacturers. Bokai Chemical Trade Recycling Company supports door-to-door chemical raw material recycling, dye recycling, paint raw material recycling, high-priced recycling and other businesses. If you have any needs in this regard, please call for consultation!
