Click image to view original image
| In stock: | Yes | Material: | Water-based Adhesive |
| Pattern: | Emulsion | Model: | Felix-488 |
| Specifications: | 18kg/drum or 1000kg/drum | Packaging: | Barrels |
"Water-based adhesive Felix-488 high-speed rail floor glue" detailed introduction
Water-based adhesive Felix-488 high-speed rail floor adhesiveBasic introduction Felix-488 is a water-based adhesive. The product has dual properties of wet and dry adhesion. The film is soft and has good properties for various substrates such as sponge, non-woven fabric, wood, synthetic rubber, PVC, metal plate, etc. The bonding effect can be applied to the bonding of substrates such as modified car interiors, buses and rail transit floor coverings. Water-based adhesive Felix-488 high-speed rail floor adhesive performance characteristicsExcellent adhesive strength;
Excellent high and low temperature resistance, aging resistance;
No organic solvent, low VOC, low odor;
Water-based adhesive Felix-488 high-speed rail floor adhesiveTechnical parameters| Technical Indicators | Reference Standards | Units | Parameters |
| Appearance | — | — | Blue Emulsion (Color Adjustable) |
| Solid Content | GB/T 2793-1995 | % | 51.0~53.0 |
| pH (23℃) | GB/T 14518-1993 | — | 8.0~10.0 |
| Sizing Amount | — | g/㎡ | 120-200 |
| Viscosity (23℃, 3#, 30RPM) | GB/T 2794-1995 | mPa s | 1500~3000 |
| Peel Strength (180°) | GB/T 2792-2014 | N/25mm | 35~50 |
The drying time of the glue is closely related to the ambient temperature and humidity, ventilation conditions, and the amount of glue applied. Try to make the thickness of the glue layer uniform. If the local drying is too slow, you can use the blower, heating and other equipment to dry quickly;
p>During roller coating construction, the glue should be applied quickly and evenly to avoid rolling back and forth to avoid uneven adhesive layer or formation of skin, and the adhesive layer should not be too thick, otherwise the glue drying time will be prolonged;
After the adhesive film is air-dried, the bonding operation time is within 1h. For double-sided impermeable substrates, the bonding should be done as early as possible within the sufficient air-drying time.
Water-based adhesive Felix-488 high-speed rail floor adhesive Purchase instructions Felix-488 should be stored at 5~35℃ in a cool, dry and ventilated environment with a shelf life of 6 months, and must be protected from frost and direct sunlight during storage. In the process of use, if it is not used for a long time, it is necessary to ensure that the lid of the opened packaging barrel or container is in a closed state to prevent the moisture on the surface of the emulsion from volatilizing to form a crust, or even the change of the properties of the emulsion.
