Click image to view original image
| Type: | UV Anaerobic Adhesive | Type: | Anaerobic Acrylic Adhesive |
| Strength: | General Adhesives | Cure Mechanism: | Reactive Adhesive |
| Components: | Single component | Pattern: | Liquid |
| Model: | Zyy-01A | Specifications: | 250ml or 500ml plastic bottle |
| Trademark: | TDS | Packaging: | 250ml or 500ml plastic bottle |
| Adapted to temperature: | -50℃～150℃ | Operating Temperature: | 0℃～80℃ |
| Transmittance: | ～95% | Curing Conditions: | 350-400 wavelength UV light |
| Appearance: | Colorless or light yellow transparent liquid | Refractive Index: | ～1.51 |
| Viscosity: | 20～80cps(25℃) | Location: | 5～15 seconds |
| Cure Speed: | 3 to 5 minutes to cure under sunlight; 10 to 40 seconds to cure under UV light; strength (i.e. fully cured anaerobic) after 8 hours | Yield: | 12000 |
"ZYY-01A glass repairing agent, glass adhesive [used for glass, plastic, metal bonding UV anaerobic dual curing UV light / visible light curing adhesive]" detailed introduction
ZYY-01A Glass Restorative, Glass Adhesive[with For glass, plastic, metal bonding UV anaerobic dual curing UV light / visible light curing adhesive]
Product Description
This glass repairing agent belongs to UV anaerobic adhesive. A dual-cure adhesive that can be cured by both UV light and anaerobic curing. It includes both the light-curing properties of UV adhesives and the anoxic-curing properties of anaerobic adhesives. Use a new type of special adhesive that provides a variety of options and meets a variety of usage patterns. Because of its good light transmission performance and its refractive index is similar to that of glass, it is commonly known as "shadowless glue" and "sun glue".
This product (ZYY-01A) is a Process-made one-component acrylate adhesive. For glass, plastic, metal bonding - such as: furniture, plastic handicrafts, crystal, watches, electronic scales, LCD, mobile phone keys, medical equipment, PET packaging, electronic manufacturing, etc. This product has the advantages of fast curing, colorless and transparent, good water resistance and stable quality.
●Product Specifications
Appearance: Colorless or light yellow transparent liquid
Viscosity: 20～80cps(25℃)
Strength:～15mpa
Refractive index: ～1.51
Light transmittance: ～95%
Curing condition: 350-400 wavelength UV light
Positioning: 5～15 seconds
Curing speed: 3～ 5 minutes; curing under UV light takes 10 to 40 seconds; reaching strength after 8 hours (ie fully cured anaerobic).
Adaptation temperature: -50 ℃ ～ 150 ℃
Working temperature: 0 ℃ ～ 80 ℃
● Product characteristics
UV usage characteristics: Quickly curing fixation under specific ultraviolet wavelength conditions.
Anaerobic use characteristics: It can be bonded and fixed in places where UV light cannot be irradiated.
High bonding strength, fast curing, and low shrinkage after curing.
High and low temperature resistance.
It is possible to use equipment or not to use equipment, which can meet the multiple options for practical use of multiple channels, and solve some process requirements.
●使用方法
1、首先将材料表面进行清洁。 2. Place (or pour) the glue evenly on the surface of the material. 3. Irradiate with ultraviolet light (within 10CM from the surface to be bonded), or use anaerobic method when no ultraviolet light is used. 4. The overflow glue will not be cured, and it is easy to clean up.
●包装与储存
This product is packaged in 250ML or 500ML plastic bottles. Store at room temperature in an airtight seal away from light. Do not store in contact with metal. Shelf life is 1 year. Residual glue cannot be returned to the original packaging for reuse.
