Click image to view original image
| In stock: | Yes | Authentication: | GB50728-2011 |
| Type: | Specialty Adhesives | Pattern: | Solvent-based Adhesive |
| Curing Conditions: | Heat Curing Adhesive | Bond Strength: | Structural Adhesive |
| Component Category: | Two Component | Apply: | Adhesive Field |
| Model: | Ws | Specifications: | 3:1 |
| Trademark: | Wusheng Smart Manufacturing | Packaging: | Plastic Drums |
| Yield: | 9988886 |
"Two-component epoxy resin adhesive for prestressed steel cable grouting and grouting" in detail
Prestressed steel cable grouting, double set for grouting parts epoxy adhesiveSourcing Instructions Cash on delivery; materials without quality problems will not be refunded or exchanged; materials can be subject to 13% tax.
Prestressed steel cable grouting, double set for grouting Epoxy AdhesiveBasic Parameters
| Viscosity (mixed) (mPa) |
2000～3000 |
| Specific gravity (hardened) (g/cm3) |
0.95 |
| Mix ratio (mass ratio) |
Main agent=hardener=3:1 |
| Can make temperature (℃) |
15～40 |
| Make time (min, 1kg) |
50(25℃) |
| Gel time (hr) |
2～4 |
Prestressed steel cable grouting, double set for grouting parts epoxy adhesiveNotes
(1) The appropriate amount of glue is 1kg in summer, and about 2-3kg in winter. (2) Construction is not allowed if the relative humidity of the construction surface is greater than 85%.
(3) The glue should be injected with a pressure glue injector.
(4) Components A and B should be mixed in strict proportions and used after mixing;
(5) Wear protective gloves during construction, and scrub with organic solvent immediately when the product is stained.
Prestressed steel cable grouting, double set for grouting Epoxy AdhesivePackaging
Packed in round plastic drums, 2 cans per set, main agent 22.5 kg/can, hardener 7.5 kg/can , a total of 30kg/set.
Prestressed steel cable grouting, double set for grouting parts epoxy adhesiveApplications
Concrete components, brick-concrete components are reinforced with wet-type outer steel plates, and the bonding process is first welded and then poured with structural adhesive;Grouting repair of internal defects (honeycombs, holes) in concrete;
Grouting fixing of machine equipment supports, grouting fixing of hanging object bolts;
Grouting of prestressed steel cables.
