Click image to view original image
| In stock: | Yes | Authentication: | ISO |
| Type: | Alkaline oxide | Pattern: | Powdered |
| Quality: | Qualified product | Type: | Alumina |
| Model: | Vk-l20m | Specifications: | 1kg/bag |
| Trademark: | Crystal and | Packaging: | Bag |
| Yield: | 500000 |
"Anti-caking agent for powder coating nano-alumina nano-alumina" in detail
Anti-caking agent for powder coating nano-alumina and nano-aluminaBasic introductionAnti-caking agent nano-alumina for powder coating
CAS#: 1344-28-1
Properties: Nano-alumina, Alias: Nano-alumina, Molecular Formula: Al2O3, Molecular Weight: 101.96
Melting point: 2050℃, Boiling point: 2980℃
Anti-caking agent for powder coating nano-alumina nano-alumina performance characteristics
Reduce the generation of static charge
Improve the flowability of the powder
Improved processability in the extruder
Avoid moisture absorption and prolong storage stability
Increase rheological properties and edge coverage on substrates
Anti-caking agent for powder coating nano-alumina nano-alumina technical parametersTechnical indicators
| Model |
VK-L20M |
| Appearance |
white powder |
| Average particle size (nm) |
10-20nm |
| Specific surface area (m2/g) |
110±10 |
| Al2O3 content (%) |
99.99 |
| Bulk Density(g/cm3) |
0.1-0.2 |
| %burn loss |
<0.5 |
Scope of use:
1. Thermosetting powder coating: epoxy resin, polyester, acrylic resin.
Examples of epoxy powder coating, polyester powder coating, acrylic powder coating, etc.
2. Thermoplastic powder coatings: Thermoplastic powder coatings include: polyethylene, polypropylene, polyester, polyvinyl chloride, chlorinated polyether, polyamide, cellulose, and polyester. Example PVC powder coating, polyethylene powder coating, nylon powder coating, fluororesin powder coating, latex powder coating, etc.
Anti-caking agent for powder coating nano-alumina nano-alumina Purchase instructionsFeatures of use:
Nano-alumina (model VK-L20M) is used in powder coatings, which can improve the bulkiness of powder coatings and has a good anti-caking effect. Good storage properties for powder coatings used in high temperature and high humidity environments. The addition amount is generally 0.3-0.5%, and it is added when the finished product is sieved. Nano-Al2O3 can improve the electrification properties of powders, especially when using tribo electrified spraying, it can significantly improve the powder application rate and solve the problem of dead corners, and has no effect on the gloss of powder coatings.
Dosage: The dosage is 0.3-0.5%, and the user should decide the dosage according to different systems.
Packing: 10kg/bag.
