Click image to view original image
| Processing customization: | Yes | Applicability: | Frozen Food Factory Equipment |
| Type: | Dairy Bubble Deaeration Equipment | Brand: | Dairy Bubble Deaeration Equipment |
| Power: | 1.9kw | Model: | XN-TQJ1 |
| Specifications: | 1000L/H | Trademark: | Maverick Light Machine |
| Packaging: | Flexible Packaging | Work pressure: | -0.098——0.08Mpa |
| Yield: | 500 |
Detailed introduction of "Anhui vacuum degasser, Anhui vacuum degassing tank"
An overview of the vacuum degasser:There are many products in the industry that need vacuum degassing in the production process, such as toothpaste, soap, soy milk, canned food, fruit juice and other products, and vacuum degassing is also required to remove the dissolved gas. (such as O2, CO2 and other gases) to achieve the purpose of ensuring product quality. Anhui vacuum degasser, also known as Anhui vacuum spit tank, is a stainless steel clean equipment that uses vacuum suction to remove non-condensable gases contained in the liquid.
Function of vacuum degasser: Remove air (oxygen) in the feed liquid, inhibit the oxidation of browning, pigments, odorants and other substances, and prevent quality degradation; remove the suspended particulate gas attached to the feed liquid, inhibit the Particles float up to maintain a good appearance; prevent foaming during canning and high temperature sterilization, which affects sterilization; reduce corrosion to the inner wall of the container. Structure of vacuum degasser Hefei Xiaoniu vacuum degassing unit includes: vacuum degassing tank with built-in special liquid distributor, energy-saving vacuum pump, discharge pump, equipment platform, electric control box, pipe fittings and valves.
How to use the vacuum degasser: When in use, just turn on the matching vacuum pump (use according to the pump's instruction manual), pump out the air in the vacuum degassing tank, and at the same time, the material is self-sucked into the tank from the feeding port. When it rises to a certain position, the control valve automatically controls the material. At this time, the feeding speed can be observed and controlled from the sight hole. When the vacuum degree in the device reaches the technological requirements, the material can be extracted from the material outlet, as long as the vacuum degree and feeding and discharging materials are maintained. balance, production can continue.
Features of vacuum degasser:
1. It can greatly shorten the exhaust time after the initial water injection of the heating or cooling system, which is very beneficial to the initial commissioning and operation of the system.
2. Remove the gas in the system to prevent air resistance and ensure the stability and reliability of the system during normal operation.
3. Eliminate the cavitation of the water pump and reduce the operating noise of the system.
4. Since the oxygen in the water is removed, the aerobic corrosion of the system will be reduced, and the service time of the equipment will be prolonged.
5. Since the gas in the water is removed, there will be no gas bubbles on the surface of the heat exchanger, which improves the heating efficiency.
6. The working time and cycle of the degasser can be adjusted as needed.
7. Continuous production operation, multiple units can be used in parallel.
8. The equipment is easy to install, and easy to maintain.
Product content from:
"Anhui Vacuum Degasser, Anhui Vacuum Degassing Tank" Other Instructions
| Model number | TQJ-1 | TQJ-2 | TQJ-3 | TQJ-10 | TQJ-15 |
| Processing Power | 1000L/H | 2000L/H | 3000L/H | 10000L/H | 15000L/H |
| Work pressure | -0.098——0.08Mpa | ||||
| Total Motor Power | 1.9kw | 2.6kw | 4.4kw | 6kw | 8kw |
| Dimensions | 1×0.75×2.8 | 1.15×0.8×3 | 1.2×0.8×3.2 | 1.6×1.7×3.3 | 1.7×1.8×3.6 |
| Weight | 270kg | 350kg | 450kg | 600kg | 800kg |
| Note: The parameters in this form are for reference only, please contact us for detailed parameters. | |||||
