Addition type foamed silicone soft foamed silicone rubber【price, manufacturer, buy, what brand is go

In stock:	Yes	Type:	Silicone
Format:	Other	Aperture Size:	Fine Pore Silica
Moisture:	none	Model:	Hy
Specifications:	20, 25, 200kg/barrel	Trademark:	Hy
Packaging:	Iron drum packaging	Yield:	10000

Detailed introduction of "Additional foamed silicone soft foamed silicone rubber"

Addition foam silicone soft foam silicone rubber Basic Introduction Additional foamed silicone Soft foamed silicone rubber is a type of environmentally friendly silicone. It consists of two parts: A component is silica gel, B component is a curing agent; the two components are mixed in a ratio of 1:1. The liquid foamed silicone is formed into a soft elastic material and is light in weight. It can be used for filling, flame retardant, shockproof, sound insulation, heat insulation and so on. Most of the customer groups choose to make flame retardant foam gaskets, foam sheets and so on. Addition foam silicone soft foam silicone rubber Features

1. No migration occurs

2. Light weight, elasticity, good feel, strong resilience

3..High foaming ratio, uniform foaming and good stability

4. Non-corrosive, strong chemical inertness, high anti-aging performance

5. The foam is fine and uniform, with small pore size and fast foaming speed

Addition foam silicone soft foam silicone rubber Technical Parameters   Addition foam silicone soft foam silicone rubber Instructions A and B components press Mix 1:1 evenly and pour it into the prepared copper mold or aluminum mold. The operation time is 2-3 minutes at room temperature, and the curing time (room temperature) is 10-15 minutes. Addition foam silicone soft foam silicone rubber Purchasing Instructions

Addition Foam Silicone Soft Foam Silicone RubberPackaging:

A component 25, 200KG/barrel

B component 25 and 200KG/drum are transported as non-dangerous goods, and the storage period is 2 years at room temperature.

Note:Do not contact this silicone with any other condensed silicone, otherwise it will cause poisoning of the curing agent and cause the silicone to not solidification phenomenon. Water, impurities, organic tin catalysts, acids, alkalis and other organic substances containing sulfur, phosphorus and nitrogen can affect the curing of the glue, and these substances should not be mixed or contacted during use.