Click image to view original image
| In stock: | Yes | Type: | Universal Adhesive |
| Pattern: | Solvent-Free Adhesive | Bond Strength: | Structural Adhesive |
| Component Category: | Two Component | Apply: | Adhesive Field |
| Model: | SPM-351-H | Specifications: | A+B |
| Trademark: | Shuiping surface | Packaging: | 30kg |
| Yield: | 20000 |
Detailed introduction of "permeable environmental protection floor adhesive"
Basic introduction of permeable environmental protection floor adhesive ApplicabilityIt can be used for permeable landscape roads, and can also be applied to indoor fields, gardens, city squares, swimming pools, bathing centers, villa courtyards, indoor and outdoor decoration, parks, fitness and leisure places, etc. Permeable environmental protection floor adhesivePerformance characteristics ①Strong adhesion: epoxy resin contains a variety of polar groups and highly reactive epoxy groups, so it has strong adhesion to a variety of polar materials.
②Small shrinkage: basically no low molecular volatiles are produced when the epoxy resin is cured. The volume shrinkage of the adhesive layer is about 1% to 2%.
③Energy saving: The modified epoxy resin adhesive can be used at temperatures above 5°C without heating, just need to mix components A and B evenly in a certain proportion.
④Environmental protection: Components A and B are clean and harmless, and there are no volatiles during polymerization.
⑤Low viscosity: low viscosity, low construction resistance, easy construction. Permeable Environmental Protection Floor AdhesiveTechnical Parameters
Permeable Environmental Protection Floor Adhesive Instructions for Use
1. Prepare the electronic scale and glue dispensing tools. The aggregate needs to be dried first. If there is too much stone powder, it is necessary to clean it
2. Pour A and B into the glue mixing container in a ratio of 2:1 and stir evenly. After stirring, the glue is poured into the stone container
3. Before pouring and spreading the material, first clean the dust on the base layer and ensure that it is dry and there is no water residue.
4. The stone aggregate is leveled. After the material is poured, please level it as soon as possible. The operation time is 30-60 minutes. It can be leveled manually or mechanically.
5. Consolidate and smooth the edges, while smoothing the edges, pay attention to the smoothness of the overall surface, and repair the concave and convex positions in time Permeable Environmental Protection Floor Adhesive Purchase Instructions Use cautions
1. The use temperature of the adhesive shall not be lower than 5℃.
2. The distribution ratio of groups A and B should be strictly in accordance with the mass ratio of 5:2;
3. When stirring components A and B, the stirring head of the mixer should be completely submerged in the liquid, and the stirring head should not be exposed to the liquid surface during the stirring process, otherwise the liquid will easily contain air bubbles after stirring.
4. The stirring time should be carried out according to the requirements (3-4 minutes), and the stirring time should not be too short.
5. The stirring speed should be carried out according to the requirements (300-400 rpm), neither too fast nor too slow.
6. The adhesive should be used within the specified time (30 minutes) after stirring, otherwise the adhesive will be easily cured.
7. When stirring the mixture, be sure to stir it evenly, otherwise it will easily affect the quality of the later construction.
8. The adhesive is flammable, and should be stored in a cool, dry, ventilated place away from fire sources and flammable materials, and equipped with fire-fighting equipment.
After waiting for the molding, finishing and smoothing, you can walk after 6 hours and 24 hours before you can fully open to traffic. During this period, you should pay attention to prevent people from stepping on it.
