Click image to view original image
| In stock: | Yes | Authentication: | 85 |
| Type: | Other | Material: | Other |
| Dosage Form: | Solvent Free | Physical Form: | Other |
| Apply: | Rubber | Model: | 58 |
| Specifications: | 9 | Trademark: | 20 |
| Packaging: | 58 | Yield: | 100000 |
Detailed introduction of "Flame-retardant chloroprene phenolic adhesive one-component ready-to-use"
The scientific name of the glue for subway shield segment is chloroprene phenolic adhesive. This kind of adhesive can be used to paste rubber, metal, cement and other products. Construction process The joints of the segment of this project are provided with two waterproof gaskets: the outer side is a porous EPDM rubber elastic gasket; the inner side is a polyether polyurethane water-swellable gasket. The gasket at the deformation seam (circumferential seam) is thickened to adapt to larger deformation; the outer elastic rubber seal is pasted with 2mm thick water-swelling rubber; the inner gasket is thickened with the same material; The side is pasted with 3mm thick nitrile cork rubber sheet. The outer side of the joint of the segment is set with a neoprene sponge rubber strip to prevent sand and shield tail grease from entering the joint, and the inner side is caulked with a foam rod and polysulfide sealant. Segment inspection → segment cleaning → material preparation → segment drying → plastering → drying → affixing seal pads → tapping → smearing retarder and plastering → drying → attaching force transmission pads → tapping → sticking Self-adhesive rubber sheet → storage → hoisting and transportation → segment installation → bolt hole sealing ring installation → segment bolt tightening , Trademark, manufacturer name, factory address, production date, product standard number. When transporting and storing in the field, avoid heavy pressure to prevent material deformation. (2) During storage, it is forbidden to contact with acids, alkalis, oils, paints and organic solvents and isolate the heat source. (3) It should not be stored in the open air for a long time to prevent rain, and should be kept indoors. (4) For the partially exposed gaskets and water retaining strips, care should be taken not to damage the packaging, measures should be taken to protect them, and they should be placed in a ventilated and dry place. (5) The adhesive used should be stored away from direct sunlight, away from fire sources, and pay attention to fire prevention
Flame-retardant chloroprene phenolic adhesive one-component ready-to-use
