Click image to view original image
| In stock: | Yes | Authentication: | ROHS |
| Material: | Resin | Pattern: | Solvent-based |
| Apply: | Plastic | Model: | JL-406 |
| Specifications: | 15kg/iron drum, 20kg/plastic drum | Trademark: | Poly glue |
| Packaging: | Barrels | Yield: | 9999999 |
Detailed introduction of "bonding PP quick-drying glue manufacturer PP plastic high-strength adhesive with good viscosity and excellent quality"
粘接PP快干胶水厂家PP塑料高强度胶粘剂粘性好品质优
JL-406ABagent PPInstant glue for plastics meets international environmental protection standards, and has passed the EU ROHS standard and SGS testing.
For some special materials, the special instant adhesive independently developed and produced , Two-component, convenient construction. Ideal for continuous production line operations. With high performance, high strength, good flexibility, moisture resistance and other properties.
[Application Range]
A The agent is a PP treatment agent. B agent is PP adhesive, PP glue is used in combination with AB, PP glue is suitable for bonding of PP, PE/POM and other materials and bonding of PE folding boxes.
【使用方法】
● Use a dry cotton cloth or sandpaper to remove dust, oil, rust, etc. from the adhesive surface, and then wipe it with a treatment agent or cleaning agent to clean the adhesive surface.
● Unscrew the front cover and it can be used. If there is glue on the bottle mouth, wipe the glue with a cotton cloth first, and then put on a needle or PE dropper before use, which can control the flow of glue and ensure the effect of bonding .
● Use JL- 406A agent PP plastic instant glue, first use A agent which is PP plastic surface treatment agent to treat the PP surface, that is, apply A agent PP treatment agent on the two bonding surfaces , When agent A is PP treatment agent dry, immediately drop a small drop of agent B is PP glue on the surface to be adhered, immediately bond and press hard to make the two bonding surfaces completely fit, and keep it until it hardens, hardening The time varies from 10-15 seconds. PP glue can reach practical strength in about 30 minutes and strength after 24 hours.
Clean up the bottle after use and screw the cap tightly .
●After use, please store the glue in a cool and dry place.
[Notes]
●Do not wear knitted gloves to use, as Juli brand cyanoacrylate is absorbed by the knitted material of the gloves, it will polymerize quickly and generate high heat during the reaction, which will burn your hands, so please remember not to wear woven gloves.
● If the glue is used accidentally, it will hurt the eyeball because the glue is hard after curing. Do not rub it with your hands, and immediately rinse with plenty of water or apply a warm towel to make the eyelids separate naturally. Do not forcefully pull it. In severe cases, send to a doctor for emergency treatment; soak in warm soapy water when in contact with skin, and remove with Juli brand series debonding agent.
●The smell is irritating, please keep the workplace ventilated when using it in large quantities.
●When there is a large amount of leakage, it can be cured with water and then scraped off.
【Package Specifications】30g /pcs, 50pcspcs/box, 10pcs/ Box
[Save]< /span>It needs to be refrigerated for storage, or below 25℃ in a cool shade Store in a dry place.
[Shelf Life]
span>6months, expired after passing the test, can continue to use.
The company also supplies: metal glue, plastic glue, paper glue, electronic glue, epoxy resin AB glue, quick-drying glue, industrial repair agent, high temperature resistant glue, special glue, treatment agent, solid sealant (thread glue )Wait.
Consultation Hotline: Mobile/WeChat 13650004312 QQ: 2281804466 Baba:
