Click image to view original image
| In stock: | Yes | Authentication: | EU RoHS |
| Material: | Resin | Pattern: | Glue |
| Apply: | metal | Model: | Jd-9218 |
| Specifications: | 5kg/barrel 15kg/barrel | Trademark: | Nine |
| Packaging: | 5kg/barrel 15kg/barrel | Yield: | 9812852 |
Detailed introduction of "JD-9218 high-strength metal adhesive supplier for sticky metal glue"
Adhesive metal GlueJD-9218 High Strength metal Adhesive Supplier
Features of JD-9218 Adhesive metal Glue:
1, < span style="font-family:SimSun;">metal AdhesiveIt is a one-component metal-bonded plastic and metal-bonded metal multi-purpose adhesive developed and produced by high-tech research and development based on polymer resin and imported reinforced resin< /span>
2. Easy to use, fast positioning, high bonding strength, room temperature curing, water resistance, good acid and alkali resistance< /span>
3. The advantages of long-term storage without deterioration, curing, etc.
4, Excellent waterproof, heat-resistant, cold-resistant, oil-resistant, corrosion-resistant and non-whitening properties;
5. passed the EUROHS standard, does not contain Triphenyl solvent is one of the glue types for bonding metals at present.
Adhesive metal Glue【 Scope of Application】
wide Used in metal products, home appliance industry, radio industry, speaker industry, hardware and plastic products, decoration, craft toys, thermal insulation materials, packaging and printing and other industries.
How to use:
1. Surface Treatment: The surface of the adherend is cleaned to ensure that the surface of the adherend is dry, free of oil and dust span>
2. Glue: put glue Apply directly to the surface of the adherend, pay attention to the glue on the adherend surface evenly, and must be double-coated with glue
3. The thickness of the glue is 0.05-0.08mm, let it dry for 8min-10min, and after the solvent evaporates (subject to non-sticky hands), press fit and flatten it. . The ideal is to heat the bonding surface after gluing (the temperature is 60-80 degrees, and the heating time is 2-3 minutes) to directly bond the two surfaces< /span>
4. Pressurize It is in close contact, remember, be sure to flatten the bonding surface to drain the air bubbles between the bonding surfaces
If it is a loose material, it can be glued for the second time, and then left to dry10min-15 min, directly bond the two surfaces, pressurize them to make close contact, and place them at room temperature for 24H to achieve high use strength, and the strength can be achieved after 72 hours.
