Click image to view original image
| Material: | Polyester | Pattern: | Solvent-based |
| Apply: | Composite Materials | Model: | QIS-3035 |
| Specifications: | QIS-3035 | Trademark: | Wakis |
| Packaging: | Original | Yield: | 900000 |
Introduction to "Outdoor Engineering Insulation Adhesives"
Huaqi Shi QIS-3035 outdoor engineering thermal insulation material adhesiveProduct use:
Outdoor projects require wall insulation. Screening, air duct insulation, package attachment. Adhesives are used for the composite interlayer of thermal insulation materials.
【Main parameters of product】
No. QIS-3035 Composite Adhesive
1 Appearance Colorless or light yellow transparent liquid
3 Viscosity (C.P.S) 3000-5000
3 Solid content% 45
4 Solubility Soluble in organic diluents, etc.
5 Toxicity level
6 Curing time (hours) 30 minutes for positioning, 12-24 hours for complete curing
7 Temperature range minus 35 degrees -80 degrees
Huaqi Shi QIS3035 glue is a one-component adhesive with special resin. No irritating odor, stable, can be constructed at room temperature. It is used for the bonding of outdoor large-scale engineering walls, and the bonding between thermal insulation materials, wood, metal, plastic, cement, concrete, tiles, marble, glass, etc. After bonding, it can be cured naturally at room temperature. The positioning time is fast, and the strength can be achieved in 15-30 minutes at room temperature. The cured adhesive has strong toughness, no whitishness, insolubility, and good waterproof, anti-corrosion and anti-rust performance.
【How to use】
1. Apply gluing at room temperature of 10-35 degrees. The surface oil, water stains or a lot of dust should be removed first from plastic or wood, metal, tile, cement concrete, etc.
2. Glue, the glue should be uniform in thickness and in place, without leaving blind spots for bonding. After double-sided gluing, let it cool for 8 minutes before attaching. It can also be glued on one side. It should be attached immediately. But the complete curing time is slightly longer. .It can be glued by a large roller coating machine or manually brushed.
3. If conditions permit, it will be properly pressurized after gluing.
4. Initial curing, 10-30 minutes for positioning, 48 hours for strength.
【Notes】
1. After gluing, it should be effectively bonded within the specified positioning time to fully react and increase the tensile strength.
2. Storage conditions: sealed, stored in a cool (25℃), ventilated warehouse, away from fire heat sources.
【Shelf life】
Sealed and stored in a cool (25℃), dry warehouse for 12 months.
【Packaging Specifications】
4. Kg/barrel. 15kg/barrel. Can also be packed according to customer's order
