Click image to view original image
| In stock: | No | Authentication: | 3c |
| Pattern: | Solid | Type: | 1 ° (primary alcohol) |
| Hydroxy number: | Diols | Category: | Aliphatic alcohol |
| Model: | A3011 | Specifications: | 200kg/barrel |
| Trademark: | Reputation | Packaging: | 200kg/barrel |
| Molecular weight: | 3000 | Viscosity: | 10000 130 degrees |
| Yield: | 29000 |
"Polyester polyols that can replace dynacoll7130" in detail
A3011 polyester polyolIntroduction: A3011 is a medium molecular weight linear copolyester polyol containing terminal hydroxyl groups. It is specially designed and developed for reactive polyurethane hot melt adhesives. It is an amorphous transparent solid at room temperature and plays a role in reactive polyurethane hot melt adhesives. Shorten open time, increase initial strength, improve melt viscosity and effect on bonding strength to polar substrates. Widely used in the production of reactive polyurethane hot melt adhesives for the automotive, wood, packaging, textile, book and board manufacturing industries.
Performance index: Appearance (visual inspection) colorless transparent solid
Solid content (W/W, %) 100
Hydroxy value (mgKOH/g) 32～39
Acid value (mgKOH/g)≤2
Molecular weight (g/mol) 3000
Moisture (W/W, %)≤0.1
Softening point (℃) 76
Flash point (℃)＞300
Density (23℃, g/cm3) 1.17
Shelf life (in original packaging) 12 months
How to use: This product is melted and dried in vacuum at 130℃ for 1 hour, and then reacted with the metered polyisocyanate under the protection of inert gas to produce reactive polyurethane hot melt adhesive.
Notes: 1. This product can be melted in the heating tank, or processed by unloading equipment.
2. Pay attention to sealing and preservation after use, and pay attention to ventilation during use.
3. This product is odorless and not a dangerous chemical. conventional method
type transportation and storage.
Packing: Packed in galvanized drum, net weight 200 or 20 kg per drum.
