Powder coating anti-caking agent nano alumina [price, manufacturer, buy, what brand is good]

Product Details

Made in China.com reminds you: Please store and use in accordance with the chemical safety data sheet (MSDS/SDS). Improper transportation, use or storage may cause personal and environmental safety risks. The generated hazardous waste should also be handled by professional institutions.

"Anti-caking agent for powder coating nano-alumina alumina" parameter description

In stock:	Yes	Authentication:	Enterprise Standard
Type:	Inorganic	Pattern:	Nano Powder
Model:	Vk-l20m	Specifications:	99.99%
Trademark:	Crystal and	Packaging:	1kg/bag
Yield:	10000000

"Anti-caking agent nano-alumina alumina for powder coatings" in detail

Anti-caking agent for powder coating nano-alumina Al2O3Basic introduction

Anti-caking agent for powder coating nano-aluminaAl2O3

CAS#: 1344-28-1

Properties: Nano-alumina, Alias: Nano-alumina, Molecular Formula: Al2O3, Molecular Weight: 101.96

Melting point: 2050℃, Boiling point: 2980℃

Model	VK-L20M
Appearance	White powder
Average particle size (nm)	10-20nm
Specific surface area (m2/g)	110±10
Al2O3 content (%)	99.99
Bulk Density(g/cm3)	0.1-0.2
% Burn Loss	<0.5

Scope of use:

1. Thermosetting powder coatings: epoxy resin, polyester, acrylic resin.

Examples of epoxy powder coating, polyester powder coating, acrylic powder coating, etc.

2. Thermoplastic powder coatings: Thermoplastic powder coatings include: polyethylene, polypropylene, polyester, polyvinyl chloride, chlorinated polyether, polyamide, cellulose, and polyester. Examples include polyvinyl chloride powder coating, polyethylene powder coating, nylon powder coating, fluororesin powder coating, latex powder coating, etc.

Features of use:

Nano-alumina (model VK-L20M) is used in powder coatings to improve the bulkiness of powder coatings and has a good anti-caking effect. Good storage properties for powder coatings used in high temperature and high humidity environments. The addition amount is generally 0.3-0.5%, and the effect is added when the finished product is sieved. Nano-Al2O3 can improve the electrification properties of powders, especially when using tribo electrified spraying, it can significantly improve the powder application rate and solve the problem of dead corners, and has no effect on the gloss of powder coatings.

Dosage: The dosage is 0.3-0.5%, and the user should decide the dosage according to different systems.

Packing: 10kg/carton.