Click image to view original image
"Jiangxi hard cotton vertical hydraulic baler, foam film waste vertical hydraulic baler" parameter description
| Brand: | Southwest Machinery | Type: | PP strapping machine |
| Applicable to: | metal, Cotton, Straw, Straw, Clothing, Grain, Waste Paper, Other | Package Type: | with |
| After-sales service: | One year warranty | Power: | 5.5kw |
| Processing customization: | Yes | Weight: | 500kg |
| Dimensions: | 1450*750*2700 | Band width: | 0-60 |
| Package width: | 1200*800*800 | Minimum wrapping width: | 300*300*300 |
| Tie Force: | 1000 | Paper Size: | 300*300*300 |
| Packaging Capability: | 4-8/h | Power Type: | Hydraulic |
| Model: | 10 tons | Specifications: | Xn-10 |
| Trademark: | Southwest | Packaging: | Complete machine |
| Yield: | 5000 |
Detailed introduction of "Jiangxi Hard Cotton Vertical Hydraulic Baler Vertical Hydraulic Baler for Foam Film Waste"
Structural composition of vertical hydraulic baler:
1. The hydraulic baler is mainly composed of hydraulic cylinder, motor and oil tank, pressure plate, box and base, upper door, lower Door, door latch, packing belt bracket, iron support, etc.
2. Mainframe frame system: The mechanical design of the solid frame made of thickened steel plate and gas shielded welding makes the equipment durable.
3. Hydraulic system: imported accessories are used for key components such as hydraulic pump, solenoid valve and hydraulic cylinder oil seal, which makes the packing pressure high. , Fast, durable and low noise.
For vertical hydraulic balers, pay attention to the following points:
(1) The hydraulic oil added to the oil tank should be Strictly used anti-wear hydraulic oil must be strictly filtered, and sufficient oil should be maintained frequently, and oil should be refilled immediately when insufficient.
(2) The oil tank should be cleaned and replaced with new oil every six months, but the first cleaning and filtering oil should not exceed one month, and the new oil that has been used once is allowed to be used again after strict filtering.
(3) Lubricating parts of the machine should be filled with lubricating oil at least once per shift as required.
(4) The sundries in the material box should be cleaned up in time.
(5) Those who do not learn, do not understand the structure, performance and operating procedures of the machine are not allowed to start the machine without authorization.
(6) When the vertical hydraulic baler has serious oil leakage or abnormal phenomena during work, it should stop running immediately to analyze the cause and eliminate the fault, and must not be forced to operate with illness.
Vertical Hydraulic BalerThere are many kinds of hydraulic cylinder products. To measure the performance of a hydraulic cylinder, it is mainly done before leaving the factory. The working performance of the hydraulic cylinder is mainly reflected in the following aspects:
1. Starting pressure: refers to the hydraulic cylinder in the no-load state It is a comprehensive index reflecting the manufacturing and assembly accuracy of hydraulic cylinder parts and the size of the sealing friction; 2. Low stable speed: refers to The hydraulic cylinder does not have a low speed of crawling when it is running at full load. It does not have a unified index. The hydraulic cylinders that undertake different tasks have different requirements for low and stable speed.
3. Internal leakage: The internal leakage of the hydraulic cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the hydraulic cylinder, and make the hydraulic cylinder unable to Accurately and stably stop at a certain position of the cylinder, so it is one of the main indicators of the hydraulic cylinder.
