Click image to view original image
I recycle high-priced stocks of dyes, pigments, paints, resins, BYK leveling agents, defoamers, dispersants, paints and inks, UV absorbers, light stabilizers, initiators, color masterbatches, white carbon black; recycled emulsifiers , Surfactant; recycled polyether polyol, cold spray zinc paint, zinc silicate paint, isocyanate HDI, TDI, MDI, polyurea paint, ethyl silicate. Recovery of white oil, soybean oil, castor oil, turpentine, glycerin, silicone oil, motor oil, hydraulic oil; resorcinol, hydroquinone, antimony trioxide; recovery of pesticides, and intermediates;
Recovery of urotropine sodium alginate, phenoxy resin, epoxy curing agent, UV resin chlorovinyl resin, chloroether resin, epoxy resin, epoxy curing agent fluorocarbon resin, terpene resin, phenol resin, acrylic resin, Alkyd resin, rosin resin, petroleum resin, silicone resin, polyamide resin, amino resin, polyvinyl chloride resin, sodium hypophosphite;
Recovery of toluene, xylene, dipropylene glycol methyl ether, isopropanol, aromatic hydrocarbon solvents: iodine, potassium iodide, rosin, zinc, calcium, barium and cadmium stearate, recovery of palm wax, paraffin wax, hot melt adhesive, pressure sensitive adhesive, various rubbers , Anti-aging agent, accelerator, recycled guar gum, polyvinyl alcohol, cellulose, polyacrylamide, starch, latex powder, phthalic anhydride, maleic anhydride, copper gold powder, zinc powder, silver powder, aluminum silver paste, nickel sulfate;
Take the non-electric industry flue gas as an example. Compared with the power industry, the ultra-low emission transformation of the non-electric industry is more and more complicated. There are many emission sources, including steel, cement, coking, non-ferrous metals, glass and many other industries; the processes of each industry are different. , The types of pollutants discharged are complex, and the flow rate and concentration are quite different; the main components of defoamers are generally hydrophobic particles, silicone oil and emulsifier. The hydrophobic particles adsorb silicone oil, so that the silicone can achieve great effects with as little as possible. As the main defoaming medium, silicone oil has very low surface tension and is neither lipophilic nor hydrophilic. It is suspended in the system. When the defoamer exists in the middle of the foam wall, the oil and water phase is discharged to produce a defoaming effect. At the same time, there is a small amount of silicone oil. Consumption: When the silicone oil outside the hydrophobic particles is consumed intact, the foam system is turbid. Therefore, the hydrophobic particles, silicone oil, emulsifier used in the defoamer, and the amount and color of the defoamer are different, which constitute the defoamer performance varies greatly. When the defoaming effect of the defoaming agent is good and the foam suppression time is long, the system will not generally show turbidity.
Recycled powder, recycled stearic acid, myristic acid, palmitic acid, cinnamic acid, lauric acid, niacin, phosphoric acid, glacial acetic acid, solid coupling agent, white mineral oil, liquid paraffin, fully semi-refined paraffin, plastic PP, PE, PA, EVA, granular TPU granules, nickel sulfate, nickel chloride, nickel acetate, nickel, zinc powder, chromic anhydride, urotropine, potassium sodium tartrate, green chromium, chromium trichloride, bleaching agent, boric acid , Thiourea, sodium benzoate, caustic soda, soda ash, trisodium phosphate, baking soda, recovery of various oily flavors, lemon oil, jasmine oil, rose oil, geranium oil, fennel oil, spearmint oil, whitening agent, Film, caustic soda, printing paste, nickel mesh, various vanillin essential oils, menthol, natural borneol potassium iodide, etc. Intermediaries are paid
Anti-agent graphite has a good neutron moderator used in atomic reactors. Uranium-graphite reactors are currently the most widely used atomic reactors. The deceleration material in the nuclear reactor used as power should have a high melting point and corrosion resistance. Graphite can meet the above requirements. The purity of graphite used in atomic reactors is very high, and the impurity content should not exceed tens of ppm. In particular, the boron content should be less than 0.5 ppm. In the national defense industry, graphite is also used to manufacture solid fuel rocket nozzles, nose cones, parts of aerospace equipment, heat insulation materials and radiation protection materials. [9]
The company recycles thousands of chemical products. Our company promises to recycle them quickly, at a reasonable price, and with professional, safe and environmentally friendly methods. Welcome your calls and sincerely look forward to cooperating with you!
