Elastomer sbs waterproof membrane

Elastomer sbs waterproof coiled material To sum up: The hot-melt construction process is an indispensable part of a set of durable and reliable waterproofing system. Its performance cannot be replaced by other processes. It can effectively solve and prevent water channeling. Water leakage and other waterproof problems can be applied throughout the year, which can shorten the construction period and is more economical. The ultimate goal of waterproofing is to be able to achieve drip-proofness. Therefore, in order to ensure the quality of project waterproofing and improve the safety factor of building waterproofing, it is recommended to use hot-melt SBS modified bitumen membrane waterproofing system first.





Government and market. 　Chinese enterprises. 　The government attaches great importance to the formulation of political documents. Including technology policies that promote product development. Planning outline. Guiding catalogs, promoting projects... and making regulations for improving the quality of waterproofing projects, but there is a lack of supervision and inspection mechanisms for implementation. 　Most companies have not really changed their minds. They use technological innovation as the driving force, adapt to the operating rules of the market mechanism, and rely on their own establishment to seek development in market competition. 　Foreign companies. 　In the operation of the market economy, the government completely liberalizes the enterprises and does not interfere with the production and operation of the enterprises. The two parties only have a tax relationship, and the enterprise can pay taxes in accordance with the law.


Waterproof membrane 4B9kMdCgv


Elastomer sbs waterproofing membrane is facing the Internet wave, and many waterproof companies use the Internet as a medium to strive for large network resources to adapt to the convenience and development opportunities brought by the Internet. 　Then, if the waterproof membrane industry wants to gain a competitive advantage in the future, it must fully understand and digest Internet thinking. The big innovation of the Internet lies in the way and speed of information dissemination. How does Yuexu waterproof membrane use internet thinking to increase the dissemination speed and broaden the channels?





The application effect is better in waterproof engineering. 　Problems and suggestions. 　Some products mix waste rubber powder and motor oil in the self-adhesive film layer, which causes the coil adhesion, low temperature resistance and durability to decline. 　The coiled material must have a certain degree of UV resistance, because sometimes the waterproof layer cannot be concealed in time after construction. 　After coil construction, the adhesive surface is easily contaminated, which affects the adhesion. 　In order to prevent damage to the waterproof layer during the reinforcement construction, the stained surface of the coiled material should be cleaned and the damaged part of the waterproof layer should be repaired before pouring the concrete.


First, use a scraper to scrape off the moldy wall, the scraped area should be a circle larger than the moldy area, and then it must be ventilated and air-dried to ensure that it is not wet to facilitate the later repair work. Clean the wall from which the wall has been scraped off, and apply the adjusted putty powder. After the putty is dry, apply lime. The lime can absorb water and keep it dry. Then apply waterproof membrane and latex paint, and then sand the wall. Just once. 　Solve the problem of blistering on the wall. 　The solution to this problem requires the reinforcement of the base layer. After shoveling off the wall in the peeling area, thoroughly remove the debris on the wall, and repaint the putty and paint. High and low temperature resistance, anti-aging, long service life. 　In terms of construction method, this construction method has the following characteristics. 　The construction technology is perfect, simple, easy to operate, and low labor intensity. 　The construction speed is fast, the work efficiency is high, and the construction period can be ensured. 　The construction quality is easily guaranteed and can meet the higher waterproof requirements. 　Process principle. 　The self-adhesive rubber bitumen waterproofing membrane is a self-adhesive waterproofing membrane with elastomeric bitumen such as SBS as the base material, polyethylene film, aluminum foil as the surface material or no film (double-sided self-adhesive), and a non-adhesive isolation layer.





The new price of SBS coil, please contact us in time if you need it, and the national unified telephone number. Related reading: SBS waterproof membrane [non-standard] price list. 　The bathroom, kitchen polyethylene polypropylene fiber composite waterproof membrane is waterproof. Polyethylene polypropylene composite waterproofing membrane is a new type of waterproofing made of virgin polyethylene synthetic polymer materials added with anti-aging agents, stabilizers, adhesion promoters, etc., and high-strength new polypropylene polyester filament non-woven fabrics through an automated production line. Coiled material.


Why use self-adhesive waterproof membrane in decoration? I believe that many people have had such questions. Today, I will introduce to you why you should use self-adhesive waterproof membranes and what benefits will you have after using them. 　1. It has self-healing property, that is, the coiled material will automatically heal with these objects when it encounters puncture or embedded hard objects, so it can still maintain good waterproof performance. 　2, the construction is safe, does not pollute the environment, the construction is simple and clean, and it is easy to achieve civilized construction on site. The cold base oil should be evenly applied, and there should be no accumulation of lumps or missing application. 　In the construction of the roof with insulation layer, the exhaust duct and exhaust holes should be reserved strictly according to the design. Construction method. 　A) Bake the bonding surface of the molten coil with a hot melt spray gun. 　B) Cocoa rolls and the base layer can be spot-bonded or the area is determined by the slope. For small bonding, the shale should be dried and baked until the asphalt melts and covers the shale flakes, and then the overlapped rolls are baked. Should be baked and compacted.

.