How many meters per roll of elastomer waterproofing membrane

The number of meters per roll of elastomer waterproofing membrane should also be aligned with the baseline, and the construction speed should not be too fast. 　D. Follow the above paving method and then carry out the other half of the coil paving to complete. Regardless of the method of paving, after the coil is laid, the isolation film on the surface of the self-adhesive coil must be protected, and it should not be removed too early, otherwise the viscosity of the coil will be weakened and it should be waited. Uncover the isolation membrane before starting the process. 　What to pay attention to when laying self-adhesive waterproof membrane.





The chairman of the company Qian Guangcheng and all employees of the company sincerely look forward to the guidance, exchanges and further discussions and cooperation of customers. 　Waterproof membrane is a kind of synthetic polymer waterproof membrane waterproof product, which has good processing and mechanical properties, high-strength weldability, high tensile strength, high elongation, convenient construction and no pollution. 　It is mainly suitable for the exposed or non-exposed roof waterproof layer of the building, and it also plays a good waterproof role for the underground building that is easy to deform.


Waterproof membrane xmfltGLn5


How many meters per roll of elastomer waterproofing membrane In the design of many large-scale engineering buildings, there are necessary expansion requirements between civil engineering and water and soil structures, and there are requirements for waterproof and shockproof, so the use and assembly of steel plate waterstop is an effective solution to the above Encountered various problems in the project. The steel waterstop uses the elastic deformation characteristics of the elastomer material to prevent leakage and seepage in the joints of the building structure, and also has the characteristics of corrosion resistance and good durability. The plastic steel plate waterstop is mainly suitable for the basic project that is set in the construction joint and the deformation joint when the concrete is poured, and is integrated with the concrete.





Self-adhesive waterproofing membranes are well received by people. The issue of waterproofing effects of waterproofing membranes is also a question that everyone has been paying attention to. How to better improve the waterproofing effect? ​​As a manufacturer of self-adhesive waterproofing membranes in Shandong, our editor Let's get to know it together. 　Cleaning the base surface It is the foundation. Before construction, it is necessary to clean the site and sprinkle water to ensure that the base is moist. 　Before the construction of the self-adhesive waterproof membrane waterproof layer, the detailed nodes with concentrated drainage and complex structure should be sealed and attached with additional layers.


Especially good waterproof materials for factory buildings and building roofs. At the same time, it can also be applied to some waterproof and moisture-proof projects such as reservoirs, toilets, basements, subways and so on. 　The use of polyethylene polypropylene composite waterproofing membrane: the waterproof construction base surface should be solid, flat, smooth, and there should be no looseness, sanding, cracks, warping and sharp protrusions, potholes, hollowing, etc. Mixture ratio: The weight ratio of cement to special rubber powder is 100 (cement): 1 (rubber powder): 50 (water) (appropriate amount of water). Proportioning method: Put the rubber powder into the container first. Qiu Guixue said that polymer waterproofing membranes can obtain various colors by adding pigments during production, and they can also play a decorative role while waterproofing. 　In addition, the production process of polymer waterproof materials has less pollution, can realize green manufacturing, can be cold-constructed, and conform to the environmental protection orientation. 　There are many people who have the same views as Qiu Guixue. During the meeting, some representatives told reporters that they are now very strict with environmental protection. Some asphalt waterproofing companies have been punished by the government and have to be punished by local residents because of their substandard emissions. closed.





1 What is point sticking method. 　When paving waterproofing membrane, the membrane or perforated membrane and the base layer adopt a point-like construction method. No less than 5 points are bonded per square meter, and the area of ​​each point is 100mm*100mm. 　1 What is the hot melt method. 　A construction method in which a flame heater is used to melt the hot melt on the bottom layer of the hot-melt waterproofing membrane for bonding. 　1 What is self-adhesive method. 　The waterproof membrane with self-adhesive glue is used, and the construction method of bonding is carried out without heat construction and no cementing material.


Especially in the southern rural areas, the leaking walls of houses are easy to peel off. If peeling off for a long time, they will become moldy, which will affect the interior decoration and look very uncomfortable. 　Generally speaking, the walls and floors of indoor kitchens, bathrooms, balconies, and the ground on the first floor of the house should be waterproofed. 　The waterproof wall of the whole house is not less than 300mm, the waterproof wall of the kitchen is generally 300mm, and the wall next to the pool is. The wall surface of the shower area in the bathroom shall not be smaller than that, the return stroke of the basin waterproof layer shall not be less than, and the return stroke of other areas shall not be less than 300mm. The sealing width of the lap edge shall not be less than 10cm. 　The head is fixed and closed. 　The ends of the coiled material are retracted into the groove (a trapezoidal groove with a depth of 20mm and a height of 40mm-60mm). The metal bead nails are firm and sealed with a special edge banding paste. 　The short-side joints of two adjacent rows of coiled materials should be staggered by more than 300mm to avoid overlapping of multi-layer joints and unevenness of the coiled materials. The waterproof area is very large, and when the construction must be carried out in stages, there are a lot of temporary closures in the intermediate process, and a special sealing paste should be used for temporary sealing.

.