What are the characteristics of elastomer modified bitumen waterproofing membranes of sbs waterproofing membranes? A variety of materials, thickness, quality, and specifications are complete. Complete matching fire roasting tools, customers can purchase them according to their needs. High temperature resistance (100℃), low temperature resistance (-25℃), long service life. With up to 1500% elongation and strong puncture resistance and tear resistance. Sbs waterproof membrane construction technology. Cold bonding method: Use a rubber squeegee to evenly apply high polymer modified asphalt adhesive or cold adhesives such as Lengma Dizhi on the surface of the base layer, and control the thickness to be uniform. While laying the coil, use the rubber roller to push the coil to remove it. Air to compaction.
The overlap width of various coils should meet the requirements of the table. A new type of two-component high-performance environmentally-friendly waterproofing membrane specially developed for the environmental protection, mildew resistance, and waterproof performance requirements of modern home decoration and engineering decoration. Shandong Yuexu waterproof manufacturer. The characteristics of Yuexu waterproof membrane. ●It can be directly applied on the wet base surface. ●It has super adhesion and impermeability on the back. ●The coating is dense and the setting period is short. ●Strong adhesion to concrete, masonry and other substrates.
Waterproof membrane 1pnKA256j
Which models of elastomer modified bitumen waterproofing membranes must be used as the equipment foundation and then the roofing waterproofing layer, and the waterproofing membranes should be wrapped on the top of the equipment foundation, and an additional layer should be added to compact the waterproof head and apply sealing paste at the same time Seal tightly with the base of the equipment. If lighter-weight facilities are placed on the waterproof layer, the waterproof layer on the upper part of the facility should be used as a coiled reinforcement layer, and fine-stone concrete should be poured on it if necessary, and the thickness should not be less than 50mm. If it is the foundation of post-cut construction, repair measures should be formulated according to the waterproof damage, and the roof waterproof layer should be repaired in time.
The overall performance of the product is good, and it meets the requirements of environmental protection and safety. The physical and mechanical performance indicators of the current product standards have reached the international level. The construction method recommended by the industry can guide the construction work. Such coils and application technologies that meet the basic requirements can reach international standards. Problems and suggestions. There are strict requirements on the drying and flatness of the base layer, and the base treatment agent must be used. Not suitable for use in high temperature environment, not suitable for construction in low temperature environment.
The price of the new 4 thick sbs waterproof membrane. Nowadays, building materials and other types of products in the market are of varying quality, with complete varieties and specifications. There are also many manufacturers of 4-thick sbs waterproof membranes sold. Therefore, if you want to buy good products in the market, you have to go to a special 4-thick sbs waterproofing membrane manufacturer and have a site visit. This is very important. Because the production process of 4-thick sbs waterproofing membrane requires many conditions, of course, the technical process is excellent, and naturally the price of 4-thick sbs waterproofing membrane will be much higher. Most of the cracking width of the base layer exceeds the extendable range of the waterproof coating. The cause of water leakage and the location of the water leakage are easy to find, and the warranty is very convenient, as long as a small amount of waterproof material repairs the cracks and damaged parts. High-quality waterproofing membranes can achieve success in the backwater surface waterproofing. Part of the waterproofing membrane can be constructed on the wet base and form a waterproof layer. waterproof materials. Convenient construction, short construction period, no need to maintain after forming, not affected by temperature, low environmental pollution, layer thickness easy to master according to design requirements, accurate calculation of materials, convenient construction site management, not easy to cut corners, uniform layer thickness, and effective when empty paving Overcome the stress of the grassroots. Water leakage of paint waterproof layer within the service life.
But for the material itself, unless it is of poor quality, this will not happen. And what if there is a hollowing situation. Don't bother about the small hollow drum. After the waterproof membrane construction is completed, you can maintain it and there is no problem. If the hollow is too bad, it will be broken and repaired. Yuexu self-adhesive waterproofing membrane product performance, construction scope, and construction steps list. Yuexu Building Materials reminds you to choose the right one. Do not choose the expensive waterproof and heat-insulating self-adhesive coil. We compare quality with the same price, and we compare favorably with the same quality.
●Hot-melting method: Use flame spray gun or torch to aim at the bottom surface and base layer of the coil and heat it evenly. When the asphalt on the surface starts to melt and become black and bright, the coil is laid while baking and compacted with a pressure roller. At the same time, attention should be paid to adjusting the flame size and speed to keep the asphalt temperature between 2002500C. After the construction is completed, the lap joint should be sealed with cold adhesive again. ●Cold bonding method: Use a rubber squeegee to evenly apply cold adhesives such as polymer modified asphalt adhesive or cold mastic on the surface of the base layer, and control the thickness to be uniform. While laying the coiled material, use the rubber stick to push the coiled material and remove it. Air to compaction. Artificial chemical synthetic waterproof material is a kind of petrochemical synthetic material, with a large number of chemical additives as the main component. This is because materials and products are harmful to construction, human living environment and natural ecological environment, mainly for the following three reasons. These raw materials and products used for building waterproof materials will consume a lot of resources, energy consumption and discharge pollutants in the industrial production process. During and after the product is used, some harmful components such as V, O, C will affect the indoor and outdoor air quality, endanger human health and the comfort of the human living environment, and even shorten the service life of the building.
.
Click image to view original image
