If you need further information about the elastomer waterproofing membrane standard, please contact us by phone. We will provide you with technology and product services. With the emergence of various high-rise buildings, more and more basements have appeared. Due to special reasons, the location of the basement is easy to seep water from wall to wall. The lower the basement, the more water permeable mud, so the basement is needed. Waterproof, but the basement waterproofing method is more complicated and more difficult than the ground waterproofing method. The following describes the basement waterproofing construction plan. Rolled material waterproof layer is suitable for underground engineering under the action of corrosive medium or vibration, usually in underground water environment.
Then it is better to use these for bathroom waterproofing, and the following are available for you to choose. Polyurethane. The viscosity of this kind of material is very good, and the followability to the wall surface is high after brushing. In places with high humidity such as bathroom and cooking room, if the waterproof material used is poor in viscosity, it is easy to have holes and cause water leakage. . The surface layer of this kind of waterproof material is very strong, high flexibility, good extensibility, corrosion resistance, and strong resistance to structural expansion and deformation. Even under poor conditions, there will be no cracks and flow, aging resistance, abrasion resistance, and It has a long service life, but it smells, black is not environmentally friendly, and it is not beautiful.
Waterproof membrane qI4A8q74m
Elastomer waterproofing membrane standard. If the roof of the cast-in-place house is detected before construction except for water leakage, the property should be found to respond to the situation in time, and then improve the waterproof layer, and check until there is no more water leakage. During the decoration and construction, in order not to cause trouble to the people downstairs and the future life, it is necessary to check the construction workers. In addition to taking care not to damage the waterproof layer, complete leak-proof measures should be taken, such as the connection between water pipes. Is it stable and fully closed? If there is a leak in the roof of yourself or someone upstairs after you move in, you don’t have to make a big effort to open the floor tiles and apply waterproofing.
Therefore, the construction can be carried out if the surface of the construction substrate is uneven or the humidity on the surface of the substrate is uniform. The base concrete does not need to be primed, which can save a lot of construction time. The working efficiency of the empty laying method is generally about 30% higher than that of the full bonding method. Therefore, the space paving method of waterproof coiled material will definitely play a positive role in reducing the project cost. The advantages of seasonal construction a. Due to the basic conditions of the low-demand air paving method, after heavy rain, the construction can be opened on a clean basis, so the waterproof project has a greater advantage in rainy construction.
Product specifications. Item. Classification. grade. Type I. Type Ⅱ. Fetal base. PY. G. Surface material. PE. S. M. thickness. 2mm. 3mm. 4mm. Width. 1000mm. Yuexu sbs waterproof membrane. High tensile strength, high elongation, and high ability to withstand cracks in the base layer. Excellent high and low temperature resistance, can be used for temperature changes throughout the year. Excellent low temperature resistance (up to -25°C). Good durability and long service life, up to 30 years. The differences in appearance and shape make the characteristics of materials, construction techniques, applicable parts, and application environments vary. The editor made a comparison of the overall performance of the two, through the comparison, let consumers roughly understand what kind of product they need. Waterproof coiled material is mainly used for building walls, roofs, tunnels, highways, landfills, etc., to resist external rainwater and groundwater leakage, a flexible building material product that can be rolled into a roll, as the foundation of the project There is no leakage connection with the building, which is the waterproof road barrier of the whole project, which plays a vital role in the whole project. Due to the material composition of waterproof coiled material and waterproof coating.
In summer, do not buy products that are exposed to high temperature and cause asphalt to flow, wrinkle, or bulge. In winter, do not buy products that break when lightly bent. Waterproof construction has certain requirements for the construction tools, base surface, and the level of the technical staff. At the same time, the quality requirements for waterproof materials are also a core issue. For example, waterproof materials are not allowed to occupy dirt to avoid waterproofing effects. However, it is not easy to clean up the general waterproofing membrane after being stained with stains. This problem has been solved very well.
Wear gloves during the construction process to avoid burns and scalds, and store flammable items such as gasoline drums and coiled materials separately, away from fire sources, to prevent fires and industrial accidents. Related reading: Different types of coils have temperature requirements for construction. Before the 1970s, there were few flat-roof houses, and they were limited to the reinforced concrete (apartment-style) houses introduced by the Housing Corporation at that time. Since then, the main research and development of asphalt waterproofing method. It can be used for waterproof and moisture-proof of various parts of underground buildings (including basement floor, elevator shaft, basement exterior wall, basement roof, etc.) as well as roofs, podiums, balconies (terraces), and toilets. Process flow and operation requirements. Grassroots requirements. The waterproof base layer must be flat and firm, without protruding sharp corners, pits and surface sanding, the surface should be clean and dry, and the corners should be rounded with a radius of 50mm as required. The moisture content of the grassroots level should be free of water droplets.
.
Click image to view original image
