Elastomer modified bitumen sbs waterproofing membrane manufacturer

Elastomer-modified bitumen sbs waterproofing membrane manufacturers use open flames for roof leaking waterproofing membranes, most of which have a high risk factor, and the leakage will be repeated.....then are there any waterproofing membranes that do not require open flame construction Woolen cloth. 　Today, the editor will introduce a non-fire-baked waterproof membrane, tear off the protective film, and automatically stick it under the sun. 　Construction method: Clean the base surface, keep it dry, peel and paste, the more the external heat will stick, the stronger it will be. 　There is a kind of waterproof membrane called self-adhesive waterproof membrane, which is similar to ordinary waterproof membrane with a layer of glue. After tearing off the protective film on the surface, the waterproof membrane can be glued to the waterproof base layer after treatment.





After the base treatment agent to be applied is dried, apply the adhesive. When the roll material is laid, the air underneath must be wiped out and rolled to compact it. The method of sticking, point sticking and emptying can also be adopted to ensure the smooth flow of the exhaust duct. 　The coiled material waterproof roofing project with insulation layer must be equipped with vertical and horizontal exhaust grooves and exhaust wells that pass through the waterproof layer. 　Cracks in the waterproof layer of the membrane. Phenomenon. 　The waterproof layer appears to leak along the ends of the prefabricated roof panels, joint cracks, and irregular cracks.


Waterproof membrane sse5q25jl


Elastomer modified bitumen sbs waterproofing membrane manufacturers play the product quality brand and trademark brand, rely on market trends and user needs to work hard, and after long-term hard work and development, can they defeat competitors, gain a firm foothold, and hope to become a company. 　Therefore, there are many century-old shops in the waterproofing industry, and they are still optimistic before the development. These companies are based on traditional products, and continue to improve and innovate, with high market recognition and taste. The above discussion and analysis made by the author pointed out some of the more common problems and deficiencies in some companies for Chinese companies, and did not dismiss the meaning of advanced companies in general: for foreign companies, it is a summary of the overall impression. . Corporate philosophy: You must have an entrepreneurial spirit and do not think that all existing problems are advanced.





The water-stop steel plate and the template are located on both sides of the water-stop steel plate, and the water-stop steel plate and the template are composed of a steel frame and steel wire mesh. The water-stop steel plate is welded to the steel frame, and also includes shear braces welded to the steel frame. The utility model has a small amount of on-site welding. It is installed in the rewinding template and installed at a speed. For convenience, it can effectively prevent the slab concrete pouring belt, half of the concrete, half of the steel plate water stop is exposed to the rewinding, and after the bottom pouring is completed, there is no need Make a template to remove, pour the belt joints and cut the hair after construction, clean up, improve the waterproof effect of the water stop plate, and avoid the occurrence of post-pour belt or sweating. The installation includes a water-stop steel plate and a template.


Related waterproofing membranes: low temperature resistant waterproofing membranes, SBS modified asphalt self-adhesive waterproofing membranes, SBS modified asphalt waterproofing membranes, root puncture-resistant waterproofing membranes. Features. Fine powder: Water tightness is a highly effective moisture-proof, impermeable, and hole-blocking material developed by absorbing advanced technology. It is also an excellent bonding material. Firm and waterproof: its flexibility is much higher than that of cement, it has the function of adjusting the thermal expansion and contraction of ceramic tiles, and the ceramic tiles are not easy to crack. Long service life: It has water resistance, adhesion, crack resistance, flexibility, heat and cold resistance and aging resistance, and long service life. For the roof of the master, cement mortar, fine stone concrete rigid protective layer or block material can be used as the protective layer. For the roof of the non-master, the surface coloring protective coating can be painted as needed. Quality requirements. 　After the EPDM waterproofing project is completed, there should be no leakage and water accumulation. Inspect the roof for leakage and accumulation of water, and whether the drainage system is smooth. Perform the closed-water test. 　With this craft. The quality should meet the requirements of relevant standards.





It can be said that any waterproof membrane coated with an adhesive layer can have self-adhesive properties. The physical properties of this type of material are consistent with the original, but the construction process becomes self-adhesive. 　The self-adhesive adhesive can be bituminous, acrylic, butyl rubber or other adhesives, which are a bit like adhesive tapes and pressure-sensitive tapes. The self-adhesive waterproofing membrane previously only refers to the self-adhesive waterproofing membrane of the body. In addition to the change of the construction process, it is very important that the self-adhesive membrane has creepage, which solves the problem of the membrane cracking in the base layer. Tension generates internal stress, which accelerates the aging and destruction of waterproofing membranes under stress. Another type of self-adhesive membrane is a waterproof membrane with a self-adhesive layer.


This kind of coiled material can also have a certain preventive effect on underground water seepage. The principle is the same as the above: the upper and lower waterproof lines are combined into one, and the upper and lower can prevent seepage, which is equal to the combination of the advantages of the two layers. The construction process requires flexibility and the technical difficulty is not high. This is not to say that anyone can do it. It means that the coil is more convenient and dexterous at the same level. It does not require extensive excavation and diversion, which saves time and effort, and it is inspected in the later stage. The process is also relatively simple. Has extremely high penetration resistance and impact resistance. 　Excellent adhesion ensures the continuity and tightness of the lap joint of the coil. 　High and low temperature resistance, anti-aging, long service life. 　In terms of construction method, this construction method has the following characteristics. 　The construction technology is perfect, simple, easy to operate, and low labor intensity. 　The construction speed is fast, the work efficiency is high, and the construction period can be ensured. 　The construction quality is easily guaranteed and can meet the higher waterproof requirements.

.