Send inquiry
Siway SV823 Polyurethane(PU) Sealant
Product Description
SV823 is a one-component moisture curable polyurethane sealant with good sealing and flexibility. It has no corrosion, no pollution, no pollution to the environment, no puncture, easy repair and good adhesion to concrete, stone, metal and other materials substrates.
Key Features
1. Weather resistance, good durability, no pulverization, no cracking.
2. Single component, excellent extrusion, no sag, easy construction.
3. Low modulus, strong displacement resistance.
Typical Applications
1.Sealing and waterproofing expansion joint of concrete exterior wall.
2. Sealing and bonding reserved joints of metal curtain wall.
3.Sealing joints between aluminium alloy window frames and concrete.
4.Bonding concrete and cement walls joints.
Technical Data Table
Note:All data above were tested under special condition (7 days after full cured).
Directions for Use
Tool: Manual or pneumatic plunger caulking gun
Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust,
grease, frost, water, dirt, old sealants and any protective coating.
For cartridge
1. Cut nozzle to give the required angle and bead size
2. Pierce the membrane at the top of the cartridge and screw on the nozzle
3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1. Clip the end of the sausage and place in barrel gun
2. Screw end cap and nozzle on to barrel gun
3. Using the trigger extrude the sealant with equal strength
Attention of operation
1. Choose this product, primer, activator and other matching product, must have bonding test before
bonding the materials, to ensure that they have good compatibility. At the same time, before
application, should guarantee that the sealant, primer and activator are in the warranty period.
2. Please strictly according to the application process, any violation of the application operation may
cause bonding failure. This product is innocuous after curing completely, but before curing, please
avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and
thoroughly with soap and water. If the situation is serious, please go to see a doctor immediately.
Packing and Storage
310ml cartridge, 400ml/600ml sausage 20pcs/box, 2 boxes/carton.
When stored at 5~25°C, humidity ≤50%RH in the original unopened containers, this product has a usable
life of 9 months from the date of production. Do not store at temp. over 25°C, humidity over 80%RH.
Transportation: moisture proof, prevent the rain, prevent sunscreen, anti-high temperature, away from heat, handle with care, crush or collision is prohibited.
Safety Operation Data
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SIWAY or other distributors, or mail to service center call
Related products
Our Factory
Exhibition
Contact Us
Await your enquiry for PU sealant, you may get super suprise from us!
welcome to visit our company
Basic Info.
Model NO. SV823 Bonding Material Building Materials:Glass,Aluminum,Wood,Ceramic Trademark SIWAY Transport Package Carton Specification 310ml/600ml Origin China HS Code 3506919090Product Description
Customer Question & Answer Ask something for more details
Siway
SV823 Polyurethane(PU) Sealant
Product Description
SV823 is a one-component moisture curable polyurethane sealant with good sealing and flexibility. It has no corrosion, no pollution, no pollution to the environment, no puncture, easy repair and good adhesion to concrete, stone, metal and other materials substrates.
Key Features
1. Weather resistance, good durability, no pulverization, no cracking.
2. Single component, excellent extrusion, no sag, easy construction.
3. Low modulus, strong displacement resistance.
Typical Applications
1.Sealing and waterproofing expansion joint of concrete exterior wall.
2. Sealing and bonding reserved joints of metal curtain wall.
3.Sealing joints between aluminium alloy window frames and concrete.
4.Bonding concrete and cement walls joints.
Technical Data Table
| PROPERTY | STANDARD/UNITS | VALUE |
| Main raw material | ----- | Polyurethane |
| Color/state | Visual inspection | Black/white/gray, paste |
| Density | Gr/cc | 1.35±0.05 |
| Volatile content | % | ≤4 |
| Surface dry time | Hours | 4 |
| Curing speed | mm/ 24hrs | 3~5 |
| Hardness | Shore A | 30±5 |
| Tensile modulus | MPa | ≤1.0 |
| Elongation at break | % | ≤700 |
| Application temperature | °C | 5~35 |
| Temperature resistance | Up to 1 hour short time, °C | 150 |
| Shelf life | month | 9 |
Directions for Use
Tool: Manual or pneumatic plunger caulking gun
Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust,
grease, frost, water, dirt, old sealants and any protective coating.
For cartridge
1. Cut nozzle to give the required angle and bead size
2. Pierce the membrane at the top of the cartridge and screw on the nozzle
3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1. Clip the end of the sausage and place in barrel gun
2. Screw end cap and nozzle on to barrel gun
3. Using the trigger extrude the sealant with equal strength
Attention of operation
1. Choose this product, primer, activator and other matching product, must have bonding test before
bonding the materials, to ensure that they have good compatibility. At the same time, before
application, should guarantee that the sealant, primer and activator are in the warranty period.
2. Please strictly according to the application process, any violation of the application operation may
cause bonding failure. This product is innocuous after curing completely, but before curing, please
avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and
thoroughly with soap and water. If the situation is serious, please go to see a doctor immediately.
Packing and Storage
310ml cartridge, 400ml/600ml sausage 20pcs/box, 2 boxes/carton.
When stored at 5~25°C, humidity ≤50%RH in the original unopened containers, this product has a usable
life of 9 months from the date of production. Do not store at temp. over 25°C, humidity over 80%RH.
Transportation: moisture proof, prevent the rain, prevent sunscreen, anti-high temperature, away from heat, handle with care, crush or collision is prohibited.
Safety Operation Data
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SIWAY or other distributors, or mail to service center call
Related products
Our Factory
Exhibition
Contact Us
Await your enquiry for PU sealant, you may get super suprise from us!
welcome to visit our company