When using SBS modified bitumen modified bitumen for planting roof with root puncture-resistant waterproof membrane for cold pasting construction, use a squeegee to spread half the width of the membrane with SBS adhesive, and then roll and paste the ruled waterproof membrane in parallel. And while laying, use rubber rollers to push the coils to eliminate air and compact them. If the ambient temperature is lower than 15℃, it should be changed to hot melt construction. Precautions. In hot melt construction, the applied base treatment agent must be dried for more than 4 hours (preferably not sticking to the feet) before the roll paving operation can be carried out to avoid fire. The construction site should also be equipped with appropriate fire extinguishing equipment.
At present, many people use waterproofing membranes for waterproofing construction. It is simple to construct due to its excellent water resistance and weather resistance. Deeply loved by many people. So what are the tips for purchasing waterproof membranes? Let's introduce to you in this article. The main points of selection of SBS modified bitumen waterproofing membrane. Type I polyester felt tire or glass fiber felt tire SBS modified bitumen waterproofing membrane has a certain tensile force and good low temperature flexibility. Suitable for roof waterproof layer of general buildings in general and colder areas.
Waterproof membrane 74Y3DrtHl
Elastomer (SBS) modified bitumen root puncture-resistant waterproofing membrane for planting roofs. Due to the low temperature flexibility, elongation, tensile strength, and durability of asphalt waterproofing membranes, it is difficult to adapt to the expansion, cracking, deformation and durability of the building base layer. Needs have been gradually eliminated from the market. Adding appropriate polymer modifiers to the asphalt can improve the shortcomings of traditional asphalt waterproofing membranes. Polymer-modified asphalt waterproofing membranes have high temperature and no brittleness, low temperature and no brittleness, high tensile strength and elongation Advantages such as higher rate. So far, polymer-modified bitumen waterproofing membranes are among the new types of waterproofing materials with a high proportion of use.
And the use of this kind of self-adhesive waterproofing membrane itself has relatively excellent adhesion to the base layer, and the adhesion of this kind of waterproofing membrane is compared with other waterproofing membranes, and it is generally better. At the same time, it can also ensure that the overlap is relatively tight, and there is no gap at all. In addition to using the main material, the polyethylene film of this waterproof roll material also has a relatively good waterproof strength. Therefore, this kind of waterproofing membrane has a double insurance in comparison, and it is more convenient and safer to use.
For further information, please contact us by phone. We will provide you with technology and product services. With the emergence of various high-rise buildings, more and more basements have appeared. Due to special reasons, the location of the basement is easy to seep water from wall to wall. The lower the basement, the more water permeable mud, so the basement is needed. Waterproof, but the basement waterproofing method is more complicated and more difficult than the ground waterproofing method. The following describes the basement waterproofing construction plan. Rolled material waterproof layer is suitable for underground engineering under the action of corrosive medium or vibration, usually in underground water environment. Then there are rubber and plastic waterproofing membranes, which use butyl rubber, polyurethane and other materials as raw materials, made of waterproof membranes, waterproof membranes, and some waterstops, which have good tensile strength. , Elasticity, elongation, resistance to sleep habits and weather resistance are commendable and firm to use. Secondly, there are cement-based waterproofing membranes. When in use, they have a relatively complete waterproof, moisture-proof, and anti-seepage effect on the cement. They can also be used in underground projects. The use of these waterproofing membranes to stop leaks has a perfect effect.
Waterproof coiled material is mainly used for building walls, roofs, tunnels, highways, landfills, etc. It is a flexible and flexible building material product that can be rolled into a roll to resist external rainwater and groundwater leakage. Waterproof coil The price of the material will be different because of the material, model, and specification. The following is the price list of the waterproof membrane prepared by Shandong Yuexu Building Materials for you. Self-adhesive waterproof membrane. thick. 1*20m length and width. It weighs 39 kilograms. 125 yuan/roll.
Has extremely high penetration resistance and impact resistance. Excellent adhesion ensures the continuity and tightness of the lap joint of the coil. High and low temperature resistance, anti-aging, long service life. In terms of construction method, this construction method has the following characteristics. The construction technology is perfect, simple, easy to operate, and low labor intensity. The construction speed is fast, the work efficiency is high, and the construction period can be ensured. The construction quality is easily guaranteed and can meet the higher waterproof requirements. The thick one is about 10 square meters and the thin one is about 18 square meters. Waterproof membranes are mainly used in building walls, roofs, tunnels, highways, landfills, etc., to resist the rain outside, groundwater seepage, and a flexible roll into a flexible building material product. It is used as a flexible building material product between the engineering foundation and the building. Leakage connection is an engineering waterproof barrier, which plays a vital role in the entire project. Multiple waterproof rolls in one roll. Sbs waterproof membrane is divided into two types: polyester tire and composite tire.
.
Click image to view original image
